Summary of Study ST002309

This data is available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org, where it has been assigned Project ID PR001480. The data can be accessed directly via it's Project DOI: 10.21228/M8DT4D This work is supported by NIH grant, U2C- DK119886.

See: https://www.metabolomicsworkbench.org/about/howtocite.php

This study contains a large results data set and is not available in the mwTab file. It is only available for download via FTP as data file(s) here.

Perform statistical analysis  |  Show all samples  |  Show named metabolites  |  Download named metabolite data  
Download mwTab file (text)   |  Download mwTab file(JSON)   |  Download data files (Contains raw data)
Study IDST002309
Study TitleTargeting malaria parasites with novel derivatives of azithromycin
Study SummaryThe spread of artemisinin resistant Plasmodium falciparum parasites is of global concern and highlights the need to identify new antimalarials for future treatments. Azithromycin, a macrolide antibiotic used clinically against malaria, kills parasites via two mechanisms: ‘delayed death’ by inhibiting the bacterium-like ribosomes of the apicoplast, and ‘quick-killing’ that kills rapidly across the entire blood stage development. Here, 22 azithromycin analogues were explored for delayed death and quick-killing activities against P. falciparum (the most virulent human malaria) and P. knowlesi (a monkey parasite that frequently infects humans). Seventeen analogues showed improved quick-killing against both Plasmodium species, with up to 38 to 20-fold higher potency over azithromycin after less than 48 or 28 hours of treatment for P. falciparum and P. knowlesi, respectively. Lead analogues had limited activity against the related parasite Toxoplasma gondii and were >5-fold more selective against malaria than human cells. Quick-killing analogues maintained activity throughout the blood stage lifecycle including ring stages of P. falciparum parasites (<12 hrs treatment). Isopentenyl pyrophosphate supplemented parasites that lacked an apicoplast were equally sensitive to quick-killing analogues, confirming that the quick killing activity of these drugs was not directed at the apicoplast. Metabolomic profiling of parasites subjected to the lead analogue revealed a similar profile to chloroquine treatment, suggesting that the food-vacuole is a likely target of this drugs activity. The azithromycin analogues characterised in this study expanded the structural diversity over previously reported quick-killing compounds and provide new starting points to develop azithromycin analogues with quick-killing antimalarial activity.
Institute
Monash University
Last NameSiddiqui
First NameGhizal
Address381 Royal Parade, Parkville, Melbourne, Victoria, 3052, Australia
Emailghizal.siddiqui@monash.edu
Phone99039282
Submit Date2022-10-04
Raw Data AvailableYes
Raw Data File Type(s)raw(Thermo)
Analysis Type DetailLC-MS
Release Date2022-10-25
Release Version1
Ghizal Siddiqui Ghizal Siddiqui
https://dx.doi.org/10.21228/M8DT4D
ftp://www.metabolomicsworkbench.org/Studies/ application/zip

Select appropriate tab below to view additional metadata details:


Project:

Project ID:PR001480
Project DOI:doi: 10.21228/M8DT4D
Project Title:Targeting malaria parasites with novel derivatives of azithromycin
Project Summary:The spread of artemisinin resistant Plasmodium falciparum parasites is of global concern and highlights the need to identify new antimalarials for future treatments. Azithromycin, a macrolide antibiotic used clinically against malaria, kills parasites via two mechanisms: ‘delayed death’ by inhibiting the bacterium-like ribosomes of the apicoplast, and ‘quick-killing’ that kills rapidly across the entire blood stage development. Here, 22 azithromycin analogues were explored for delayed death and quick-killing activities against P. falciparum (the most virulent human malaria) and P. knowlesi (a monkey parasite that frequently infects humans). Seventeen analogues showed improved quick-killing against both Plasmodium species, with up to 38 to 20-fold higher potency over azithromycin after less than 48 or 28 hours of treatment for P. falciparum and P. knowlesi, respectively. Lead analogues had limited activity against the related parasite Toxoplasma gondii and were >5-fold more selective against malaria than human cells. Quick-killing analogues maintained activity throughout the blood stage lifecycle including ring stages of P. falciparum parasites (<12 hrs treatment). Isopentenyl pyrophosphate supplemented parasites that lacked an apicoplast were equally sensitive to quick-killing analogues, confirming that the quick killing activity of these drugs was not directed at the apicoplast. Metabolomic profiling of parasites subjected to the lead analogue revealed a similar profile to chloroquine treatment, suggesting that the food-vacuole is a likely target of this drugs activity. The azithromycin analogues characterised in this study expanded the structural diversity over previously reported quick-killing compounds and provide new starting points to develop azithromycin analogues with quick-killing antimalarial activity.
Institute:Monash University
Last Name:Siddiqui
First Name:Ghizal
Address:381 Royal Parade, Parkville, Melbourne, Victoria, 3052, Australia
Email:ghizal.siddiqui@monash.edu
Phone:99039282

Subject:

Subject ID:SU002395
Subject Type:Cultured cells
Subject Species:Plasmodium falciparum
Taxonomy ID:5833

Factors:

Subject type: Cultured cells; Subject species: Plasmodium falciparum (Factor headings shown in green)

mb_sample_id local_sample_id treatment Experiment
SA226974MaC1_E1_1C1 1
SA226975MaC1_E1_3C1 1
SA226976MaC1_E1_2C1 1
SA226977MaC1_E2_3C1 2
SA226978MaC1_E2_1C1 2
SA226979MaC1_E2_2C1 2
Showing results 1 to 6 of 6

Collection:

Collection ID:CO002388
Collection Summary:For metabolomics experiments, two 150 mL flasks at 6% haematocrit containing tightly synchronised parasites 28-34 hrs post-invasion (5-6 hrs rupture window), were harvested via magnet purification (Miltenyi Biotech). Infected RBC density was quantitated by flow cytometry (Tham et al., 2010) and 2 mL of 3x 107 parasites were added into the wells of 24 well microtiter plates. Parasites were incubated for 1 hrs at 37o C to stabilise the culture. Following this initial incubation, 5x IC50 of the azithromycin analogue C1 and control drugs chloroquine, dihydroartemisinin (DHA) and azithromycin were added and incubated for 2 hrs. Supernatant was removed and parasites washed twice with 800 L ice-cold 1 x PBS, with cells pelleted via centrifugation at 400 x g for 5 mins at 0o C. Cell pellets were resuspended in 200 L of ice-cold extraction buffer (CHCl3/MeOH/water (1:3:1 v/v)) containing 1 µM internal standards, CHAPS and PIPES, and then incubated on ice for 1 hrs with shaking at 200 rpm. Cell debris was pelleted with centrifugation at 14800 x g for 10 mins at 0 oC. The resulting supernatant (180 µL) was transferred to Eppendorf tubes and the remaining ~20 µL were combined to make a pooled QC sample. Extraction blank samples (without cells) were prepared alongside and samples were stored at -80 ºC until analysis.
Sample Type:Blood (whole)

Treatment:

Treatment ID:TR002407
Treatment Summary:For metabolomics experiments, two 150 mL flasks at 6% haematocrit containing tightly synchronised parasites 28-34 hrs post-invasion (5-6 hrs rupture window), were harvested via magnet purification (Miltenyi Biotech). Infected RBC density was quantitated by flow cytometry (Tham et al., 2010) and 2 mL of 3x 107 parasites were added into the wells of 24 well microtiter plates. Parasites were incubated for 1 hrs at 37o C to stabilise the culture. Following this initial incubation, 5x IC50 of the azithromycin analogue C1 and control drugs chloroquine, dihydroartemisinin (DHA) and azithromycin were added and incubated for 2 hrs.

Sample Preparation:

Sampleprep ID:SP002401
Sampleprep Summary:Supernatant was removed and parasites washed twice with 800 L ice-cold 1 x PBS, with cells pelleted via centrifugation at 400 x g for 5 mins at 0o C. Cell pellets were resuspended in 200 L of ice-cold extraction buffer (CHCl3/MeOH/water (1:3:1 v/v)) containing 1 µM internal standards, CHAPS and PIPES, and then incubated on ice for 1 hrs with shaking at 200 rpm. Cell debris was pelleted with centrifugation at 14800 x g for 10 mins at 0 oC. The resulting supernatant (180 µL) was transferred to Eppendorf tubes and the remaining ~20 µL were combined to make a pooled QC sample. Extraction blank samples (without cells) were prepared alongside and samples were stored at -80 ºC until analysis.

Combined analysis:

Analysis ID AN003771 AN003772
Analysis type MS MS
Chromatography type HILIC HILIC
Chromatography system Thermo Dionex Ultimate 3000 Thermo Dionex Ultimate 3000
Column SeQuant ZIC-pHILIC (150 x 4.6mm,5um) SeQuant ZIC-pHILIC (150 x 4.6mm,5um)
MS Type ESI ESI
MS instrument type Orbitrap Orbitrap
MS instrument name Thermo Q Exactive Orbitrap Thermo Q Exactive Orbitrap
Ion Mode POSITIVE NEGATIVE
Units relative intensity relative intensity

Chromatography:

Chromatography ID:CH002790
Instrument Name:Thermo Dionex Ultimate 3000
Column Name:SeQuant ZIC-pHILIC (150 x 4.6mm,5um)
Column Temperature:25
Flow Gradient:80% B decreasing to 50% B over 15 min, then to 5% B at 18 min until 21 min, increasing to 80% B at 24 min until 32 min.
Flow Rate:0.3 ml/min
Solvent A:100% water; 20 mM ammonium carbonate
Solvent B:100% acetonitrile
Chromatography Type:HILIC

MS:

MS ID:MS003514
Analysis ID:AN003771
Instrument Name:Thermo Q Exactive Orbitrap
Instrument Type:Orbitrap
MS Type:ESI
MS Comments:Liquid chromatography-mass spectrometry (LC-MS) data was acquired on a Q-Exactive Orbitrap mass spectrometer (Thermo Scientific) coupled with high-performance liquid chromatography system (HPLC, Dionex Ultimate® 3000 RS, Thermo Scientific) as per previously described 49. Briefly, chromatographic separation was performed on a ZIC-pHILIC column equipped with a guard (5 µm, 4.6 × 150 mm, SeQuant®, Merck). The mobile phase (A) was 20 mM ammonium carbonate (Sigma Aldrich), (B) acetonitrile (Burdick and Jackson) and needle wash solution was 50% isopropanol. The column flow rate was maintained at 0.3 ml/min with temperature at 25 ºC and the gradient program was as follows: 80% B decreasing to 50% B over 15 min, then to 5% B at 18 min until 21 min, increasing to 80% B at 24 min until 32 min. Total run time was 32 min with an injection volume of 10 µL. Mass spectrometer was operated in full scan mode with positive and negative polarity switching at 35k resolution at 200 m/z, with detection range of 85 to 1275 m/z, AGC target was 1e6 ions with a maximum injection time of 50 ms. Electro-spray ionization source (HESI) was set to 4.0 kV voltage for positive and negative mode, sheath gas was set to 50, aux gas to 20 and sweep gas to 2 arbitrary units, capillary temperature 300 °C, probe heater temperature 120 °C. The samples were analyzed as a single batch to avoid batch-to-batch variation and randomized to account for LCMS system drift over time. Repeated analysis of pooled quality control samples was performed throughout the batch to confirm signal reproducibility
Ion Mode:POSITIVE
  
MS ID:MS003515
Analysis ID:AN003772
Instrument Name:Thermo Q Exactive Orbitrap
Instrument Type:Orbitrap
MS Type:ESI
MS Comments:Liquid chromatography-mass spectrometry (LC-MS) data was acquired on a Q-Exactive Orbitrap mass spectrometer (Thermo Scientific) coupled with high-performance liquid chromatography system (HPLC, Dionex Ultimate® 3000 RS, Thermo Scientific) as per previously described 49. Briefly, chromatographic separation was performed on a ZIC-pHILIC column equipped with a guard (5 µm, 4.6 × 150 mm, SeQuant®, Merck). The mobile phase (A) was 20 mM ammonium carbonate (Sigma Aldrich), (B) acetonitrile (Burdick and Jackson) and needle wash solution was 50% isopropanol. The column flow rate was maintained at 0.3 ml/min with temperature at 25 ºC and the gradient program was as follows: 80% B decreasing to 50% B over 15 min, then to 5% B at 18 min until 21 min, increasing to 80% B at 24 min until 32 min. Total run time was 32 min with an injection volume of 10 µL. Mass spectrometer was operated in full scan mode with positive and negative polarity switching at 35k resolution at 200 m/z, with detection range of 85 to 1275 m/z, AGC target was 1e6 ions with a maximum injection time of 50 ms. Electro-spray ionization source (HESI) was set to 4.0 kV voltage for positive and negative mode, sheath gas was set to 50, aux gas to 20 and sweep gas to 2 arbitrary units, capillary temperature 300 °C, probe heater temperature 120 °C. The samples were analyzed as a single batch to avoid batch-to-batch variation and randomized to account for LCMS system drift over time. Repeated analysis of pooled quality control samples was performed throughout the batch to confirm signal reproducibility
Ion Mode:NEGATIVE
  logo