Summary of Study ST002558

This data is available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org, where it has been assigned Project ID PR001650. The data can be accessed directly via it's Project DOI: 10.21228/M8DX4F This work is supported by NIH grant, U2C- DK119886.

See: https://www.metabolomicsworkbench.org/about/howtocite.php

This study contains a large results data set and is not available in the mwTab file. It is only available for download via FTP as data file(s) here.

Show all samples  
Download mwTab file (text)   |  Download mwTab file(JSON)   |  Download data files (Contains raw data)
Study IDST002558
Study TitleExtraction and Untargeted Analysis of Metabolome from Undemineralised Cortical Bone Matrix for Forensic Application
Study SummaryUntargeted metabolomics has become the gold standard for the profiling of low-molecular-weight compounds. Recently, metabolomics has shown great potential in forensic science in the field of toxicology and postmortem interval estimation. The current study aims to evaluate three extraction protocol and four liquid chromatography coupled with mass spectrometry assays that could offer a valuable tool to identify biomarkers for PMI estimation. One fragment for anterior human skeletal tibia from a 82 years old male individual belonging to the Forensic Anthropology Center - Texas State University collection was powdered and extracted in five replicates to be extracted according to a the biphasic chloroform/methanol/water protocol and two single phase protocols based on methanol/water and methanol/acetonitrile/water. Formal analysis was carried out ThermoFisher Ultimate 3000 HPLC in hydrophilic interaction (HILIC) and reverse phase (RP) liquid chromatography coupled with SCIEX 6600 TripleTOF Q-TOF mass spectrometer.
Institute
University of Central Lancashire
DepartmentNatural Sciences
Last NameBonicelli
First NameAndrea
Address1 North Cliff street
Emailabonicelli@uclan.ac.uk
Phone07383974949
Submit Date2023-03-15
Num Groups3
Total Subjects1
Num Males1
Raw Data AvailableYes
Raw Data File Type(s)mzML
Analysis Type DetailLC-MS
Release Date2024-03-17
Release Version1
Andrea Bonicelli Andrea Bonicelli
https://dx.doi.org/10.21228/M8DX4F
ftp://www.metabolomicsworkbench.org/Studies/ application/zip

Select appropriate tab below to view additional metadata details:


Sample Preparation:

Sampleprep ID:SP002665
Sampleprep Summary:The bone piece was further powdered using a Spex SamplePrep 6775-115 Freezer/Mill Small Cryogenic Grinder operated in liquid nitrogen at speed 10 with 3min pre-cooling, 2min run and 2min cooling protocol. The powder was stored in a cryovial at -80◦C until further processing. Biphasic Extraction 50mg of bone powder was placed in a 2mL Pre-Filled Bead Mill Tubes (ceramic 1.4 mm in diameter) and 900µL of 2:1 (% v/v) Chlor:MeOH were added. Samples were vortexed for 30s and and homogenised (4x20s bursts at 7200RPMs, pause 2min between bursts) in a Precellys evolution. To induce phase separation, 400µL of LC‐MS grade water was added and homogenised (4x20s bursts at 7200RPMs, pause 2min between bursts). The samples were then centrifuged at 4°C for 10min at 2000RPMs and rest in ice for 5min. 600µL lower fraction (organic) was collected and transferred to fresh Eppendorf tubes and the samples were re‐extracted for a second time using 500µL of 2:1 (% v/v) Chlor:MeOH and the tube homogenised (4x20s bursts at 7200RPMs, pause 2min between bursts). The two respective fractions were combined and concentrated. 600µL lower fraction (organic) was collected and transferred the previous Eppendorf tube. This was centrifuged at 13000rpm, 4°C for 10min and 1ml of the supernatant was collected and dried under nitrogen flow. 350µL of aqueous phase in a fresh Eppendorf tube and centrifuge at 13000rpm, 4°C for 10min and 300µL transferred to a fresh tube and dried under nitrogen flow. Dry extracts were store at -80°C until testing. Methanol-Water Extraction 50mg of bone powder was placed in a 2mL Pre-Filled Bead Mill Tubes (ceramic 1.4 mm in diameter) and 750µL of 8:2 (% v/v) MeOH:Water were added. Samples were vortexed for 30s and and homogenised (4x20s bursts at 7200RPMs, pause 2min between bursts) in a Precellys Evolution. The homogenisation tube was centrifuged at 13000RPMs, 4°C for 10min, 700µL were moved to a fresh tube. 750µL of 8:2 (% v/v) MeOH:Water were added and the homogenisation step was repeated. The homogenisation tube was centrifuged at 13000RPMs, 4°C for 10min, 700µL were moved to the same collection tube. The tube with the two extracts was centrifuged at 13000RPMs, 4°C for 10min and 1.2mL of supernatant were transferred in a fresh tube and dried under nitrogen flow. Dry extracts were store at -80°C until testing. Methanol-Acetonitrile-Water Extraction 50mg of bone powder was placed in a 2mL Pre-Filled Bead Mill Tubes (ceramic 1.4 mm in diameter) and 750µL of 2:2:1 (% v/v/v) MeOH:AC:Water were added. Samples were vortexed for 30s and and homogenised (4x20s bursts at 7200RPMs, pause 2min between bursts) in a Precellys Evolution. The homogenisation tube was centrifuged at 13000RPMs, 4°C for 10min, 700µL were moved to a fresh tube. 750µL of 2:2:1 (% v/v/v) MeOH:ACN:Water were added and the homogenisation step was repeated. The homogenisation tube was centrifuged at 13000RPMs, 4°C for 10min, 700uL were moved to the same collection tube. The tube with the two extracts was centrifuged at 13000RPMs, 4°C for 10min and 1.2mL of supernatant were transferred in a fresh tube and dried under nitrogen flow. Dry extracts were store at -80°C until testing.
Processing Storage Conditions:Described in summary
Extract Storage:-80℃
  logo