Return to study ST000346 main page
MB Sample ID: SA015300
Local Sample ID: | BAL_Normal_7376_011 |
Subject ID: | SU000366 |
Subject Type: | Animal |
Subject Species: | Homo sapiens |
Taxonomy ID: | 9606 |
Species Group: | Human |
Select appropriate tab below to view additional metadata details:
Subject:
Subject ID: | SU000366 |
Subject Type: | Animal |
Subject Species: | Homo sapiens |
Taxonomy ID: | 9606 |
Species Group: | Human |
Factors:
Local Sample ID | MB Sample ID | Factor Level ID | Level Value | Factor Name |
---|---|---|---|---|
BAL_Normal_7376_011 | SA015300 | FL003397 | No Asthma | Condition |
Collection:
Collection ID: | CO000360 |
Collection Summary: | 50ml of hospital grade sterile saline was instilled into the lungs of human volunteers. As much liquid as possible is then gently suctioned out. The sample is then centrifuged to remove cellular material and debris, and supernatant collected and frozen at -80C |
Collection Protocol Filename: | StudyDesign-GerardKaiko10202015.pdf |
Sample Type: | Bronchoalveolar lavage supernatant |
Treatment:
Treatment ID: | TR000380 |
Treatment Summary: | The 3 groups are as follows: 1. Healthy controls (5) 2. Subjects with mild asthma (5) 3. Subjects with severe asthma (5) |
Treatment Protocol Filename: | StudyDesign-GerardKaiko10202015.pdf |
Sample Preparation:
Sampleprep ID: | SP000373 |
Sampleprep Summary: | None |
Combined analysis:
Analysis ID | AN000561 | AN000562 |
---|---|---|
Analysis type | MS | MS |
Chromatography type | Reversed phase | Reversed phase |
Chromatography system | Agilent 6530 | Agilent 6550 |
Column | Waters Acquity CSH C18 (100 x 2.1mm,1.7um) | Waters Acquity CSH C18 (100 x 2.1mm,1.7um) |
MS Type | ESI | ESI |
MS instrument type | QTOF | QTOF |
MS instrument name | Agilent 6530 QTOF | Agilent 6550 QTOF |
Ion Mode | POSITIVE | NEGATIVE |
Units | Peak height | Peak height |
Chromatography:
Chromatography ID: | CH000398 |
Chromatography Summary: | UPLC |
Methods Filename: | Data_Dictionary_Fiehn_laboratory_CSH_QTOF_lipidomics_05-29-2014.pdf |
Instrument Name: | Agilent 6530 |
Column Name: | Waters Acquity CSH C18 (100 x 2.1mm,1.7um) |
Column Pressure: | 450-850 bar |
Column Temperature: | 65 C |
Flow Gradient: | 15% B to 99% B |
Flow Rate: | 0.6 mL/min |
Sample Injection: | 1.67 uL |
Solvent A: | 60% acetonitrile/40% water; 10mM formic acid; 10mM ammonium formate |
Solvent B: | 90% isopropanol/10% acetonitrile; 10mM formic acid; 10mM ammonium formate |
Analytical Time: | 13 min |
Capillary Voltage: | 3500 |
Time Program: | 15 min |
Weak Wash Solvent Name: | Isopropanol |
Weak Wash Volume: | 5 seconds |
Strong Wash Solvent Name: | Same |
Target Sample Temperature: | Autosampler temp 4 C |
Randomization Order: | Excel |
Chromatography Type: | Reversed phase |
Chromatography ID: | CH000399 |
Chromatography Summary: | UPLC |
Methods Filename: | Data_Dictionary_Fiehn_laboratory_CSH_QTOF_lipidomics_05-29-2014.pdf |
Instrument Name: | Agilent 6550 |
Column Name: | Waters Acquity CSH C18 (100 x 2.1mm,1.7um) |
Column Pressure: | 450-850 bar |
Column Temperature: | 65 C |
Flow Gradient: | 15% B to 99% B |
Flow Rate: | 0.6 mL/min |
Sample Injection: | 5.0 uL |
Solvent A: | 60% acetonitrile/40% water; 10mM formic acid; 10mM ammonium formate |
Solvent B: | 90% isopropanol/10% acetonitrile; 10mM formic acid; 10mM ammonium formate |
Analytical Time: | 13 min |
Capillary Voltage: | 3500 |
Time Program: | 15 min |
Weak Wash Solvent Name: | Isopropanol |
Weak Wash Volume: | 5 seconds |
Strong Wash Solvent Name: | Same |
Target Sample Temperature: | Autosampler temp 4 C |
Randomization Order: | Excel |
Chromatography Type: | Reversed phase |
MS:
MS ID: | MS000497 |
Analysis ID: | AN000561 |
Instrument Name: | Agilent 6530 QTOF |
Instrument Type: | QTOF |
MS Type: | ESI |
MS Comments: | Lipidomics runs are MS1 data; Identifications made from pooled MS/MS runs Lipidomics runs are performed in negative and positve mode (two filenames) |
Ion Mode: | POSITIVE |
Capillary Voltage: | 3500 |
Collision Gas: | Nitrogen |
Dry Gas Flow: | 8 l/min |
Dry Gas Temp: | 325 |
Fragment Voltage: | 120 |
Fragmentation Method: | Auto MS/MS |
Ion Source Temperature: | 200 |
Ion Spray Voltage: | 1000 |
Ionization: | Neg |
Precursor Type: | Intact Molecule |
Reagent Gas: | Nitrogen |
Source Temperature: | 325 C |
Dataformat: | .d |
Desolvation Gas Flow: | 11 l/min |
Desolvation Temperature: | 350 C |
Nebulizer: | 35 psig |
Octpole Voltage: | 750 |
Scan Range Moverz: | 60-1700 Da |
Scanning Cycle: | 2 Hz |
Scanning Range: | 60-1700 Da |
Skimmer Voltage: | 65 |
MS ID: | MS000498 |
Analysis ID: | AN000562 |
Instrument Name: | Agilent 6550 QTOF |
Instrument Type: | QTOF |
MS Type: | ESI |
MS Comments: | Lipidomics runs are MS1 data; Identifications made from pooled MS/MS runs Lipidomics runs are performed in negative and positve mode (two filenames) |
Ion Mode: | NEGATIVE |
Capillary Voltage: | 3500 |
Collision Gas: | Nitrogen |
Dry Gas Flow: | 13 l/min |
Dry Gas Temp: | 325 |
Fragment Voltage: | 175 |
Fragmentation Method: | Auto MS/MS |
Ion Source Temperature: | 200 |
Ion Spray Voltage: | 1000 |
Ionization: | Neg |
Precursor Type: | Intact Molecule |
Reagent Gas: | Nitrogen |
Source Temperature: | 325 C |
Dataformat: | .d |
Desolvation Gas Flow: | 11 l/min |
Desolvation Temperature: | 350 C |
Nebulizer: | 35 psig |
Octpole Voltage: | 750 |
Scan Range Moverz: | 60-1700 Da |
Scanning Cycle: | 2 Hz |
Scanning Range: | 60-1700 Da |
Skimmer Voltage: | 65 |