Return to study ST001195 main page
MB Sample ID: SA083158
Local Sample ID: | QC3 |
Subject ID: | SU001262 |
Subject Type: | Bacteria |
Subject Species: | Synechocystis sp. PCC 6803 |
Taxonomy ID: | 1148 |
Genotype Strain: | NCBI:txid1148 |
Cell Biosource Or Supplier: | ATCC |
Select appropriate tab below to view additional metadata details:
Subject:
Subject ID: | SU001262 |
Subject Type: | Bacteria |
Subject Species: | Synechocystis sp. PCC 6803 |
Taxonomy ID: | 1148 |
Genotype Strain: | NCBI:txid1148 |
Cell Biosource Or Supplier: | ATCC |
Factors:
Local Sample ID | MB Sample ID | Factor Level ID | Level Value | Factor Name |
---|---|---|---|---|
QC3 | SA083158 | FL012603 | 26 | time |
Collection:
Collection ID: | CO001256 |
Collection Summary: | For each metabolomics time-point, a 10 mL culture were rapidly sampled via sterile on-reactor syringes into a pre-weighed centrifuge tube, quenched in -4°C 1X PBS, spun at 3,000g for 5 min., decanted, frozen in liquid nitrogen, and lyophilized at -50°C. The workflow from sampling to centrifugation took < 2 minutes; lyophilized samples were stored at -80°C for < 1 month prior to extraction. A biphasic extraction from lyophilized cell pellets was performed via a 2:1:1.6 MTBE:MeOH:H2O biphasic extraction, modified from the protocol developed by Salem et al. (Salem et al., 2016) resulting in a top layer of MTBE with non-polar soluble metabolites, a lower layer of MeOH:H2O with polar and semi-polar soluble metabolites, and an insoluble pellet. Each liquid layer was transferred to a fresh glass vial and dried under nitrogen gas overnight. The MTBE layer was resuspended in 1:1 toluene:MeOH and analyzed via Q-TOF-MS with a UPLC Phenyl Hexyl column (“RP-MS”). The MeOH:H2O layer was resuspended in 1:1 H2O:MeOH, split evenly and subjected to either i) derivatization in methoxyamine HCl and MSTFA followed by GC-MS analysis, or ii) targeted SRM analysis on a tandem quadrupole-MS equipped with a HILIC column. The insoluble pellet was hydrolyzed with a hydrochloric acid (HCl) based on previously published protocols (Fountoulakis and Lahm, 1998) (Huang, Kaiser and Benner, 2012) to analyze individual amino acids, nucleoside, and carbohydrate content of the insoluble polymers utilizing MTBSTFA derivatization for insoluble amino acids. Of the soluble phases, 10 µL were removed from each sample and pooled to create a QC sample, mixed, and aliquoted into thirteen vials. A QC sample was run after every sixth injection. |
Sample Type: | Bacterial cells |
Treatment:
Treatment ID: | TR001277 |
Treatment Summary: | Synechocystis sp. PCC 6803 [N-1] (ATCC 27184, NCBI Taxonomy ID: 1080229) was utilized for all experiments. A light-emitting diode photobioreactor (LED PBR) was engineered to provide a rectified sinusoidal waveform light profile which (results in the negative half-cycle being set to zero) via two custom 4000K White LED panels (Reliance Laboratories, Port Townsend WA) arranged opposite a water bath facing inwards, 5% CO2 at 200 mL min-1 via in-house gas mixing and custom aerators to provide sufficient mixing, 27-30°C temperature control via a Huber Ministat and custom water bath (Midwest Custom Aquarium, Starbuck MN), and improved light penetration at high volumes via custom flat-panel reactors (FPRs) built in a circular geometry to maximize mixing (Allen Scientific Glass, Boulder CO) (Figure S1). At the peak, 1,600 mol photons m-2s-1 (E) was provided as measured by LightScout Quantum Meter (Model: 3415FXSE). . A single LED-PBR was inoculated and entrained to sinLD cycles for two days; this entrained culture was then use inoculated three biological triplicate FPRs in the LED PBR (Figure S2). Reactors were cultivated under the sinLD cycle profile for an additional day of entrainment prior to sampling (total of 3 days of entrainment). |
Sample Preparation:
Sampleprep ID: | SP001270 |
Sampleprep Summary: | Briefly, 6 mL of 75% methanol (MeOH) was added to pellets, vortexed, and transferred to glass vials. 9 mL of 100% methyl tert-butyl ether (MTBE) was added, vortexed for 30 seconds, placed on automatic shaker for 1.5 hours at 4 ºC, and sonicated for 15 minutes. 3.75 mL of water was added, each extraction was vortexed by hand for 1 minute, and centrifuged for 10 minutes at 3,270g at 4ºC. A biphasic solution with a pellet formed: the top, green MTBE layer and the bottom, clear MeOH:H2O layer were separated into separate tubes and dried under N2,gas overnight. The pellet was stored at -80 ºC. After drying, the MTBE layer was resuspended in 100 uL 1:1 toluene:MeOH, transferred to a LC-MS vial insert, and stored at -80C for <1 month prior to MS analysis. The MeOH:H2O layer was resuspended in 1 mL of 1:1 H2O:MeOH, transferred to a 1.7 mL centrifuge tube and spun at 15,000g for 2 minutes at 4 ºC. The supernatant was split into two 465 µL aliquots—one for GCMS and one for LC(HILIC)MS—in glass vials and dried under N2,gas. The protocol outlined above is suitable for filter-quenched cyanobacteria samples and centrifuged cell pellets. The polar methanol/water fraction resulting from the biphasic extraction was processed for analysis by hydrophilic interaction liquid chromatography (HILIC) LC-MS. Dried samples were resuspended in 100 µL 1:1 H2O:MeOH and 10 µL were aliquoted into a pooled QC sample. Samples were stored at -80 ºC until analysis. The pooled QC sample was mixed and aliquoted into twelve vials. A QC injection was run every tenth injection. The dried polar fraction for analysis by GC-MS was stored at -80 ºC until derivatization, immediately prior to MS analysis. Samples were derivatized in 30 uL methoxyamine HCl and 30 uL MSTFA, as specified in the following section. Ten microliters were removed from each sample to create a pooled QC sample, mixed, and aliquoted into thirteen vials. A QC sample was run after every sixth injection. The non-polar MTBE phase was processed for non-targeted LC-MS analysis. Twenty microliters from each sample were pooled, mixed, and aliquoted into thirteen pooled QC samples. QC injections were placed after every sixth injection. |
Combined analysis:
Analysis ID | AN001991 |
---|---|
Analysis type | MS |
Chromatography type | GC |
Chromatography system | Thermo ISQ |
Column | Trace 1310 GC |
MS Type | EI |
MS instrument type | GC-TOF |
MS instrument name | Thermo ISQ |
Ion Mode | POSITIVE |
Units | spectral abundance per cell |
Chromatography:
Chromatography ID: | CH001439 |
Chromatography Summary: | For non-targeted GC-MS experiments, metabolites were detected using a Trace 1310 GC coupled to a Thermo ISQ mass spectrometer. Samples (1 µL) were injected at a 10:1 split ratio to a 30 m TG-5MS column (Thermo Scientific, 0.25 mm i.d., 0.25 μm film thickness) with a 1.2 mL/min helium gas flow rate. GC inlet was held at 285°C. The oven program started at 140°C for 1 min, followed by a ramp of 15°C/min to 330°C, and 5 min hold. Masses between 50-650 m/z were scanned at 5 scans/sec under electron impact ionization. Transfer line and ion source were held at 300 and 260°C, respectively. Pooled QC samples were injected after every 6 actual samples. |
Instrument Name: | Thermo ISQ |
Column Name: | Trace 1310 GC |
Chromatography Type: | GC |
MS:
MS ID: | MS001844 |
Analysis ID: | AN001991 |
Instrument Name: | Thermo ISQ |
Instrument Type: | GC-TOF |
MS Type: | EI |
MS Comments: | Raw data was converted to *.CSV with Waters® Databridge. For idMS/MS (RP-LC-MS runs), a file was converted for low-collision, high-collision, and LockSpray for each sample. Peaks were detected within the XCMS workflow using the Centwave algorithm (Smith et al. 2006). |
Ion Mode: | POSITIVE |