Return to study ST002226 main page
MB Sample ID: SA212296
| Local Sample ID: | MS51-17 |
| Subject ID: | SU002312 |
| Subject Type: | Cultured cells |
| Subject Species: | Homo sapiens |
| Taxonomy ID: | 9606 |
Select appropriate tab below to view additional metadata details:
Subject:
| Subject ID: | SU002312 |
| Subject Type: | Cultured cells |
| Subject Species: | Homo sapiens |
| Taxonomy ID: | 9606 |
Factors:
| Local Sample ID | MB Sample ID | Factor Level ID | Level Value | Factor Name |
|---|---|---|---|---|
| MS51-17 | SA212296 | FL025911 | 786-M1A | Cell line |
| MS51-17 | SA212296 | FL025911 | conditioned media | Sample type |
Collection:
| Collection ID: | CO002305 |
| Collection Summary: | 1.5x105 cells were seeded onto a 6-well plate and cultured in the Plasmax media for 24h. The conditioned medium at 24 hours was analysed for exometabolomics, using media without cells as controls. Quantification of protein content and cell counting was carried using additional plates seeded in parallel. |
| Sample Type: | Cultured cells |
Treatment:
| Treatment ID: | TR002324 |
| Treatment Summary: | Cells were cultured in the Plasmax media supplemented with 2.5% FBS for 24 hours. |
Sample Preparation:
| Sampleprep ID: | SP002318 |
| Sampleprep Summary: | Media samples collected at t=0 and t=24hrs were centrifuged at 4 °C for 10 min. 50 µl of supernatants was further extracted with 350 µl of metabolite extraction solution (50% methanol, 30% acetonitrile, 20% ultrapure water, 5 µM final concentration valine-d8). The solution was then centrifuged at 4 °C for 10 min at max speed and the supernatant collected onto LC-MS vials. |
Combined analysis:
| Analysis ID | AN003635 |
|---|---|
| Analysis type | MS |
| Chromatography type | HILIC |
| Chromatography system | Thermo Dionex Ultimate 3000 |
| Column | SeQuant ZIC-pHILIC |
| MS Type | ESI |
| MS instrument type | Orbitrap |
| MS instrument name | Thermo Q Exactive Orbitrap |
| Ion Mode | UNSPECIFIED |
| Units | peak area |
Chromatography:
| Chromatography ID: | CH002690 |
| Chromatography Summary: | Chromatographic separation of metabolites was achieved using a Millipore Sequant ZIC-pHILIC analytical column (5 µm, 2.1 × 150 mm) equipped with a 2.1 × 20 mm guard column (both 5 mm particle size) with a binary solvent system. Solvent A was 20 mM ammonium carbonate, 0.05% ammonium hydroxide; Solvent B was acetonitrile. The column oven and autosampler tray were held at 40 °C and 4 °C, respectively. The chromatographic gradient was run at a flow rate of 0.200 mL/min as follows: 0–2 min: 80% B; 2-17 min: linear gradient from 80% B to 20% B; 17-17.1 min: linear gradient from 20% B to 80% B; 17.1-23 min: hold at 80% B. Samples were randomized and the injection volume was 5 µl. A pooled quality control (QC) sample was generated from an equal mixture of all individual samples and analysed interspersed at regular intervals. |
| Instrument Name: | Thermo Dionex Ultimate 3000 |
| Column Name: | SeQuant ZIC-pHILIC |
| Column Temperature: | 40 |
| Flow Gradient: | 0-2 min: 80% B; 2-17 min: linear gradient from 80% B to 20% B; 17-17.1 min: linear gradient from 20% B to 80% B; 17.1-23 min: hold at 80% B |
| Flow Rate: | 0.200 mL/min |
| Solvent A: | 100% water; 20 mM ammonium carbonate; 0.05% ammonium hydroxide |
| Solvent B: | 100% acetonitrile |
| Chromatography Type: | HILIC |
MS:
| MS ID: | MS003386 |
| Analysis ID: | AN003635 |
| Instrument Name: | Thermo Q Exactive Orbitrap |
| Instrument Type: | Orbitrap |
| MS Type: | ESI |
| MS Comments: | Metabolites were measured with a Thermo Scientific Q Exactive Hybrid Quadrupole-Orbitrap Mass spectrometer (HRMS) coupled to a Dionex Ultimate 3000 UHPLC. The mass spectrometer was operated in full-scan, polarity-switching mode, with the spray voltage set to +4.5 kV/-3.5 kV, the heated capillary held at 320 °C, and the auxiliary gas heater held at 280 °C. The sheath gas flow was set to 55 units, the auxiliary gas flow was set to 15 units, and the sweep gas flow was set to 0 unit. HRMS data acquisition was performed in a range of m/z = 70–900, with the resolution set at 70,000, the AGC target at 1 × 106, and the maximum injection time (Max IT) at 120 ms. Metabolite identities were confirmed using two parameters: (1) precursor ion m/z was matched within 5 ppm of theoretical mass predicted by the chemical formula; (2) the retention time of metabolites was within 5% of the retention time of a purified standard run with the same chromatographic method. Chromatogram review and peak area integration were performed using the Thermo Fisher software Tracefinder 5.0 and the peak area for each detected metabolite was normalized against the total ion count (TIC) of that sample to correct any variations introduced from sample handling through instrument analysis. The normalized areas were used as variables for further statistical data analysis. |
| Ion Mode: | UNSPECIFIED |
