Return to study ST002976 main page
MB Sample ID: SA323231
Local Sample ID: | 1A2-01-10466 |
Subject ID: | SU003089 |
Subject Type: | Mammal |
Subject Species: | BALB/C nude mice |
Select appropriate tab below to view additional metadata details:
Subject:
Subject ID: | SU003089 |
Subject Type: | Mammal |
Subject Species: | BALB/C nude mice |
Factors:
Local Sample ID | MB Sample ID | Factor Level ID | Level Value | Factor Name |
---|---|---|---|---|
1A2-01-10466 | SA323231 | FL038618 | Doxorubicin | Treatment |
Collection:
Collection ID: | CO003082 |
Collection Summary: | MDA-MB-231 cell line was cultured in DMEM medium supplemented with 10% fetal bovine serum and 1% penicillin/streptomycin (Sigma Aldrich, St. Louis, MO, USA) at 37 °C in a humidified atmosphere containing 5% CO2. This study was approved by the Institutional Animal Care and Use Committee (IACUC) at the University of Sharjah (Ethical Approval Number: ACUC-06-08-2022). Standard ethical guidelines were followed in all animal procedures conducted. Thirty female BALB/C nude mice (8-10 weeks age), with an average weight of 26-27 g, were included in the study and maintained in our institutional animal facility in accordance with following the animal care guidelines. The mice were randomized into five experimental groups (6 per group). Twenty-four mice were selected for the (CDX) model, and one group served as the negative control that didn’t receive any treatment. MDA-MB-231 cells (2 × 106 in 50 μL PBS & 50 μL Matrigel) were injected subcutaneously into the neck region of the mice. The mice were allowed to reach a tumor volume of 150-200 mm3 before further treatment. Then, tumor-bearing mice were randomized into the following groups: untreated xenografts (positive controls) and three treatment groups, DOX, 5-FU, and a combination of DOX and 5-FU. The mice in the DOX group were administered 1mg/kg of DOX once weekly , and the mice in the 5-FU group received 50 mg/kg of 5-FU daily for five consecutive days both treatments administered via an intraperitoneal (i.p.) route. The mice in the combination therapy group received DOX & 5-FU as separate injections, and the treatment duration was two weeks. An overview of the experiment flow. The body weight of the mice was measured at the start of the study and twice weekly from the beginning of the treatments. Tumor growth and progression were monitored by palpation and measurement of tumor size periodically using a digital vernier caliper. The tumor volume in cm3 was determined using the formula (volume = π/6 × length × width2). All mice were anesthetized and euthanized via cardiac puncture at the end of the treatment period. Tumors were excised and weighed, and their sizes were measured. Also, blood serum was collected from each mouse. Both tumor and serum samples were stored at -80°C for further analysis. |
Sample Type: | Blood (plasma) |
Treatment:
Treatment ID: | TR003098 |
Treatment Summary: | Then, tumor-bearing mice were randomized into the following groups: untreated xenografts (positive controls) and three treatment groups, DOX, 5-FU, and a combination of DOX and 5-FU. The mice in the DOX group were administered 1mg/kg of DOX once weekly , and the mice in the 5-FU group received 50 mg/kg of 5-FU daily for five consecutive days both treatments administered via an intraperitoneal (i.p.) route [32]. The mice in the combination therapy group received DOX & 5-FU as separate injections, and the treatment duration was two weeks. An overview of the experiment flow. The body weight of the mice was measured at the start of the study and twice weekly from the beginning of the treatments. Tumor growth and progression were monitored by palpation and measurement of tumor size periodically using a digital vernier caliper. The tumor volume in cm3 was determined using the formula (volume = π/6 × length × width2) [33]. All mice were anesthetized and euthanized via cardiac puncture at the end of the treatment period. Tumors were excised and weighed, and their sizes were measured. Also, blood serum was collected from each mouse. Both tumor and serum samples were stored at -80°C for further analysis. |
Sample Preparation:
Sampleprep ID: | SP003095 |
Sampleprep Summary: | Each collected serum sample (100 µL) was mixed with 300 µL of methanol (≥99.9 %, LC-MS CHROMASOLV) in Eppendorf tubes, followed by vortex and incubation at -20°C for 2 hours. After vortex and centrifugation at 14,000 rpm for 15 minutes, the supernatant was evaporated at 35-40°C using speed vacuum evaporation (EZ-2 Plus (GeneVac, Ipswich, UK). The extracted samples were resuspended in 200 µL of 0.1% formic acid in Deionized Water-LC-MS CHROMASOLV. Subsequently, the supernatant was filtered through a 0.45 µm pore size hydrophilic nylon syringe filter for LC-MS/MS analysis and collected in inserts within LC glass vials. All samples were placed in the autosampler at the temperature set at 4℃ to proceed with the analysis by Q-TOF MS. A pooled QC sample was created to ensure analysis reproducibility by mixing 10 µL from each sample. |
Combined analysis:
Analysis ID | AN004886 |
---|---|
Analysis type | MS |
Chromatography type | Reversed phase |
Chromatography system | Bruker Elute |
Column | Hamilton Intensity Solo 2 C18 (100 x 2.1mm, 1.8um) |
MS Type | ESI |
MS instrument type | QTOF |
MS instrument name | Bruker timsTOF |
Ion Mode | POSITIVE |
Units | AU |
Chromatography:
Chromatography ID: | CH003687 |
Chromatography Summary: | Mobile phases A (water with 0.1% formic acid) and B (acetonitrile with 0.1% formic acid) were used with the following gradient elusion mode: 0 to 2 min, 1% B; 2 to 17 min, 1–99% B; 17 to 20 min, 99% B; 20 to 20.1 min, 99–1% B; 20.1 to 30 min, 1% B. The flow rate was 0.25 mL/min from 0 to 20 min, 0.35 mL/min from 20 min to 28.3 min, and 0.25 mL/min from 28.3 to 30 min. The sample injection volume was 10 μl, and separation occurred on a Hamilton® Intensity Solo 2 C18 column (2.1 × 100 mm, 1.8 µm) (Bruker Daltonik) at 35°C. |
Instrument Name: | Bruker Elute |
Column Name: | Hamilton Intensity Solo 2 C18 (100 x 2.1mm, 1.8um) |
Column Temperature: | 35 |
Flow Gradient: | gradient elusion mode: 0 to 2 min, 1% B; 2 to 17 min, 1–99% B; 17 to 20 min, 99% B; 20 to 20.1 min, 99–1% B; 20.1 to 30 min, 1% B. |
Flow Rate: | 0.25 mL/min from 0 to 20 min, 0.35 mL/min from 20 min to 28.3 min, and 0.25 mL/min from 28.3 to 30 min. |
Solvent A: | Water (0.1% Formic Acid) |
Solvent B: | ACN (0.1% Formic Acid) |
Chromatography Type: | Reversed phase |
MS:
MS ID: | MS004630 |
Analysis ID: | AN004886 |
Instrument Name: | Bruker timsTOF |
Instrument Type: | QTOF |
MS Type: | ESI |
MS Comments: | The ESI source conditions were set with a capillary voltage of 4500 V, drying gas flow rate of 10.0 l/min at 220°C, nebulizer pressure of 2.2 bar, and the End Plate offset at 500 V. Sodium formate (10 mM) was injected at the beginning of each sample run and used as a calibrant for internal calibration during data processing. The MS acquisition process consisted of two phases. First, an auto MS scan lasting from 0 to 0.3 minutes was utilized for calibrating sodium formate. The second phase encompassed auto MS/MS scanning with CID acquisition, including fragmentation, which extended from 0.3 to 30 minutes. Both acquisition phases were conducted in positive mode at a rate of 12 Hz. The automatic mass scan range within each run spanned from 50 to 1300 m/z, with a precursor ion width of ±0.5, a cycle time of 0.5 seconds, and a threshold of 400 counts. Active exclusion was initiated after three spectra and lifted after 0.2 minutes. For MS2 acquisition, a data-dependent acquisition (DDA) approach was employed, with collision energy settings varying between 100% and 250% and being set at 20 eV. TRX-2101/RT-28-calibrants from Nova Medical Testing Inc. for the Bruker T-ReX LC-QTOF were injected before sample analysis to assess the column's performance, reversed-phase liquid chromatography (RPLC) separation, multipoint retention time calibration, and the mass spectrometer. Additionally, TRX-3112-R/MS Certified Human serum solution for Bruker T-ReX LC-QTOF (provided by Nova Medical Testing Inc.) was prepared from pooled human blood and administered before sample analysis to validate the performance of the LC-MS instruments. The analysis followed a randomized sequence order, commencing with five injections of solvent A (0.1% formic acid in deionized water) to facilitate apparatus equilibration. Subsequently, five injections of the pooled QC sample were carried out. Furthermore, one QC injection was conducted every (9-10 samples) to assess the consistency of the analysis. |
Ion Mode: | POSITIVE |