Return to study ST002430 main page
MB Sample ID: SA242928
Local Sample ID: | OilPalm_Drought_Control_R1_POS |
Subject ID: | SU002519 |
Subject Type: | Plant |
Subject Species: | Elaeis guineensis Jacq. |
Taxonomy ID: | NCBI:txid51953 |
Select appropriate tab below to view additional metadata details:
Combined analysis:
Analysis ID | AN003955 | AN003956 |
---|---|---|
Analysis type | MS | MS |
Chromatography type | Reversed phase | Reversed phase |
Chromatography system | Shimadzu Nexera X2 | Shimadzu Nexera X2 |
Column | Waters Acquity BEH C18 (150 x 2mm, 1.7um) | Waters Acquity BEH C18 (150 x 2mm, 1.7um) |
MS Type | ESI | ESI |
MS instrument type | QTOF | QTOF |
MS instrument name | Bruker maXis Impact qTOF | Bruker maXis Impact qTOF |
Ion Mode | POSITIVE | NEGATIVE |
Units | Peak intensity | Peak intensity |
MS:
MS ID: | MS003690 |
Analysis ID: | AN003955 |
Instrument Name: | Bruker maXis Impact qTOF |
Instrument Type: | QTOF |
MS Type: | ESI |
MS Comments: | High-resolution mass spectrometry (HRMS) was performed in a MaXis 4G Q-TOF MS system (Bruker Daltonics, Germany) using an electrospray source in the positive and negative ion modes (ESI(+)–MS and ESI(−)–MS). The MS instrument settings used were: endplate offset, 500 V; capillary voltage, 3800 V; nebulizer pressure, 4 bar; dry gas flow, 9 L/min, dry temperature, 200 °C; and column temperature, 40 °C. The acquisition spectra rate was 3.00 Hz, monitoring a mass range from 70 to 1200 m/z. Sodium formate solution (10 mM NaOH solution in 50/50 v/v isopropanol/water containing 0.2% formic acid) was directly injected through a 6-port valve at the beginning of each chromatographic run to external calibration. UHPLC–MS data was acquired by the HyStar Application version 3.2 (Bruker Daltonics, Germany), and data processing was done using Data Analysis 4.2 (Bruker Daltonics, Germany). |
Ion Mode: | POSITIVE |
MS ID: | MS003691 |
Analysis ID: | AN003956 |
Instrument Name: | Bruker maXis Impact qTOF |
Instrument Type: | QTOF |
MS Type: | ESI |
MS Comments: | High-resolution mass spectrometry (HRMS) was performed in a MaXis 4G Q-TOF MS system (Bruker Daltonics, Germany) using an electrospray source in the positive and negative ion modes (ESI(+)–MS and ESI(−)–MS). The MS instrument settings used were: endplate offset, 500 V; capillary voltage, 3800 V; nebulizer pressure, 4 bar; dry gas flow, 9 L/min, dry temperature, 200 °C; and column temperature, 40 °C. The acquisition spectra rate was 3.00 Hz, monitoring a mass range from 70 to 1200 m/z. Sodium formate solution (10 mM NaOH solution in 50/50 v/v isopropanol/water containing 0.2% formic acid) was directly injected through a 6-port valve at the beginning of each chromatographic run to external calibration. UHPLC–MS data was acquired by the HyStar Application version 3.2 (Bruker Daltonics, Germany), and data processing was done using Data Analysis 4.2 (Bruker Daltonics, Germany). |
Ion Mode: | NEGATIVE |