Metabolomics Workbench : NIH Data Repository

MB Sample ID: SA169019

Local Sample ID:	LPIAT1 KO #1-6
Subject ID:	SU001894
Subject Type:	Cultured cells
Subject Species:	Mus musculus
Taxonomy ID:	10090
Age Or Age Range:	8 weeks old
Gender:	Male

Select appropriate tab below to view additional metadata details:

Sample Preparation:

Sampleprep ID:	SP001900
Sampleprep Summary:	The following solutions were prepared for lipid extractions; the quench mixture comprising 484 ml MeOH, 242 ml CHCl3, and 23.55 ml 1 M HCl; the pre-derivatization wash composed of 240 ml CHCl3, 120 ml MeOH and 90 ml 0.01 M HCl; and the post-derivatization wash made up of 240 ml CHCl3, 120 ml MeOH, and 90 ml H2O. Wash mixtures were shaken and allowed to separate into two phases. For pre/post-derivatization wash, the upper phase of each solution was used. Cells were washed twice with PBS and collected to a safe-lock poly-propylene tube (2 ml) with 1 M HCl (500 μl), followed by centrifugation (15,000 g, 5 min at 4 ºC). Supernatants were removed rapidly and resuspended with 750 μl of quench mix, 170 μl of H2O and internal standards [10 μl containing 2 ng 12:0/13:0 PI, 17:0/20:4 PI (4)P, 17:0/20:4 PI (4,5)P2 and 17:0/20:4 PI (3,4,5)P3], followed by vortex-mixing and lipid extract steps. Lipid extraction was performed, based on procedures described by J Clark et al. The single-phase sample (a mixture of 170 μl of an aqueous sample, 2 ng of internal standards, and 750 μl of quench mix) were mixed with 725 μl of CHCl3 and 170 μl of 2M HCl, followed by vortex-mixing and centrifugation (15,000 g, 5 min at room temperature). The lower organic phase was collected into a fresh safe-lock poly-propylene tube (2 ml) and mixed with 708 μl of prederivatization wash, followed by vortex-mixing and centrifugation (15,000 g, 3 min at room temperature). The lower phase was collected into another fresh tube and subjected to derivatization. Derivatization of lipids was performed in a fume hood with adequate personal safety equipment as follows, based on procedures described by J Clark et al7. Fifty μl trimethylsilyl diazomethane in hexane (2 M solution; Sigma-Aldrich) was added to the lipid extracts (~1 ml), and after leaving to stand 10 min at room temperature, the reaction was quenched with 6 μl of acetic acid. Next, 700 μl post-derivatization wash solution was added to the mixture, followed by centrifugation (1,500 g, 3 min). The resultant lower phase was collected and rewashed with a 700 μl post-derivatization wash solution. Then 90 μl of MeOH and 10 μl of H2O were added to the final collected lower phase. The samples were dried up with a centrifugal evaporator. Finally, samples were dissolved in 80μl MeOH, sonicated briefly, and 20 μl H2O was added. To avoid degradation, the samples were stored at -80ºC until use.

Sampleprep ID:

SP001900

Sampleprep Summary:

The following solutions were prepared for lipid extractions; the quench mixture comprising 484 ml MeOH, 242 ml CHCl3, and 23.55 ml 1 M HCl; the pre-derivatization wash composed of 240 ml CHCl3, 120 ml MeOH and 90 ml 0.01 M HCl; and the post-derivatization wash made up of 240 ml CHCl3, 120 ml MeOH, and 90 ml H2O. Wash mixtures were shaken and allowed to separate into two phases. For pre/post-derivatization wash, the upper phase of each solution was used. Cells were washed twice with PBS and collected to a safe-lock poly-propylene tube (2 ml) with 1 M HCl (500 μl), followed by centrifugation (15,000 g, 5 min at 4 ºC). Supernatants were removed rapidly and resuspended with 750 μl of quench mix, 170 μl of H2O and internal standards [10 μl containing 2 ng 12:0/13:0 PI, 17:0/20:4 PI (4)P, 17:0/20:4 PI (4,5)P2 and 17:0/20:4 PI (3,4,5)P3], followed by vortex-mixing and lipid extract steps. Lipid extraction was performed, based on procedures described by J Clark et al. The single-phase sample (a mixture of 170 μl of an aqueous sample, 2 ng of internal standards, and 750 μl of quench mix) were mixed with 725 μl of CHCl3 and 170 μl of 2M HCl, followed by vortex-mixing and centrifugation (15,000 g, 5 min at room temperature). The lower organic phase was collected into a fresh safe-lock poly-propylene tube (2 ml) and mixed with 708 μl of prederivatization wash, followed by vortex-mixing and centrifugation (15,000 g, 3 min at room temperature). The lower phase was collected into another fresh tube and subjected to derivatization. Derivatization of lipids was performed in a fume hood with adequate personal safety equipment as follows, based on procedures described by J Clark et al7. Fifty μl trimethylsilyl diazomethane in hexane (2 M solution; Sigma-Aldrich) was added to the lipid extracts (~1 ml), and after leaving to stand 10 min at room temperature, the reaction was quenched with 6 μl of acetic acid. Next, 700 μl post-derivatization wash solution was added to the mixture, followed by centrifugation (1,500 g, 3 min). The resultant lower phase was collected and rewashed with a 700 μl post-derivatization wash solution. Then 90 μl of MeOH and 10 μl of H2O were added to the final collected lower phase. The samples were dried up with a centrifugal evaporator. Finally, samples were dissolved in 80μl MeOH, sonicated briefly, and 20 μl H2O was added. To avoid degradation, the samples were stored at -80ºC until use.