Metabolomics Workbench : NIH Data Repository

MB Sample ID: SA352346

Local Sample ID:	CX_27dpi_R_1
Subject ID:	SU003345
Subject Type:	Amphibian
Subject Species:	Xenopus laevis
Taxonomy ID:	8355

Select appropriate tab below to view additional metadata details:

Sample Preparation:

Sampleprep ID:	SP003352
Sampleprep Summary:	Lipids were extracted from the retinal tissue with a Bligh and Dyer method. The organic phase containing the lipids was removed after centrifugation and dried down with a vacuum centrifuge. The lipids were flushed with argon gas to prevent oxidation and stored at -80°C prior to analysis. Dried lipid samples were reconstitued in 49µl of isopropanol:acetonitrile 1:1 (v/v) and 1µl of EquiSPLASH™ LIPIDOMIX® Quantitative Internal Standard (330731) and sonicated for 15 minutes for total solubilization. Samples were split into two separate vials containing 25µl each, one for positive mode and one for negative mode. Reversed phase chromatographic separation was performed on Vanquish Horizon UHPLC system (Thermo) using an Accucore Vanuqish C18+ UHPLC Column. An injection volume of 5µl was used and the flow rate was 260 µl/min. Mobile phase A was 50% acetonitrile, 50% water, 5mM ammonium formate, and 0.1% formic acid. Mobile phase B was 88% isopropanol, 10% acetonitrile, 2% water, 5mM ammonium formate and 0.1% formic acid.

Sampleprep ID:

SP003352

Sampleprep Summary:

Lipids were extracted from the retinal tissue with a Bligh and Dyer method. The organic phase containing the lipids was removed after centrifugation and dried down with a vacuum centrifuge. The lipids were flushed with argon gas to prevent oxidation and stored at -80°C prior to analysis. Dried lipid samples were reconstitued in 49µl of isopropanol:acetonitrile 1:1 (v/v) and 1µl of EquiSPLASH™ LIPIDOMIX® Quantitative Internal Standard (330731) and sonicated for 15 minutes for total solubilization. Samples were split into two separate vials containing 25µl each, one for positive mode and one for negative mode. Reversed phase chromatographic separation was performed on Vanquish Horizon UHPLC system (Thermo) using an Accucore Vanuqish C18+ UHPLC Column. An injection volume of 5µl was used and the flow rate was 260 µl/min. Mobile phase A was 50% acetonitrile, 50% water, 5mM ammonium formate, and 0.1% formic acid. Mobile phase B was 88% isopropanol, 10% acetonitrile, 2% water, 5mM ammonium formate and 0.1% formic acid.