Summary of Study ST000242
This data is available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org, where it has been assigned Project ID PR000195. The data can be accessed directly via it's Project DOI: 10.21228/M8630S This work is supported by NIH grant, U2C- DK119886.
See: https://www.metabolomicsworkbench.org/about/howtocite.php
Study ID | ST000242 |
Study Title | Whole unconditioned medium (Defined culture media, M199),Whole M1 medium,Whole M2 medium |
Study Type | differential metabolomics |
Study Summary | Media was flash frozen with N2 and stored at -80 C. Samples can be stored at -80 C until use. ~1 ml aliquots. The following media has been provided to the metabolomics core in biological triplicates. Complete (Whole) Media: 1) Whole unconditioned medium (Defined culture media, M199) 2) Whole M1 medium 3) Whole M2 medium |
Institute | Mayo Clinic |
Department | Physiology and Biomedical Engineering |
Last Name | Farrugia |
First Name | Gianrico |
Dasari.Surendra@mayo.edu | |
Submit Date | 2015-06-26 |
Num Groups | 1 |
Raw Data Available | Yes |
Raw Data File Type(s) | d |
Analysis Type Detail | LC-MS |
Release Date | 2016-07-08 |
Release Version | 2 |
Select appropriate tab below to view additional metadata details:
Project:
Project ID: | PR000195 |
Project DOI: | doi: 10.21228/M8630S |
Project Title: | Metabolimic Analysis of Conditioned Macrophage Media |
Project Type: | Untargeted LC-MS Metabolomics |
Project Summary: | We are studying the secreted components from pro-inflammatory macrophages, coined M1. We use a macrophage at the opposite end of the macrophage phenotype spectrum as a control, the anti-inflammatory macrophage, coined M2. M1 macrophage conditioned media has a <3 kD factor that reduces survival of a cell of interest in primary culture. This factor is not present in M2 macrophage conditioned media <3 kD, as there is no effect on primary cell numbers. The goal of this project is to analyze the components present in the M1 conditioned <3 kD media and compare to the M2 conditioned < 3kD media. |
Institute: | Mayo Clinic |
Department: | Physiology and Biomedical Engineering |
Last Name: | Farrugia |
First Name: | Gianrico |
Address: | 200 First Street SW, Rochester, MN 55905 |
Email: | Dasari.Surendra@mayo.edu |
Phone: | 507-284-0513 |
Subject:
Subject ID: | SU000262 |
Subject Type: | Human |
Subject Species: | Homo sapiens |
Taxonomy ID: | 9606 |
Species Group: | Mammals |
Factors:
Subject type: Human; Subject species: Homo sapiens (Factor headings shown in green)
mb_sample_id | local_sample_id | Sample Status |
---|---|---|
SA011163 | ms5047-2-3 | Whole M1 medium |
SA011164 | ms5047-2-2 | Whole M1 medium |
SA011165 | ms5047-2-1 | Whole M1 medium |
SA011166 | ms5047-3-3 | Whole M2 medium |
SA011167 | ms5047-3-1 | Whole M2 medium |
SA011168 | ms5047-3-2 | Whole M2 medium |
SA011160 | ms5047-1-3 | Whole unconditioned medium (Defined culture media, M199) |
SA011161 | ms5047-1-2 | Whole unconditioned medium (Defined culture media, M199) |
SA011162 | ms5047-1-1 | Whole unconditioned medium (Defined culture media, M199) |
Showing results 1 to 9 of 9 |
Collection:
Collection ID: | CO000253 |
Collection Summary: | Whole media |
Sample Type: | Media |
Treatment:
Treatment ID: | TR000273 |
Treatment Summary: | Media was flash frozen with N2 and stored at -80 C. Samples can be stored at -80 C until use. ~1 ml aliquots. The following media has been provided to the metabolomics core in biological triplicates. Complete (Whole) Media:1) Whole unconditioned macrophage medium (Defined culture media, M199)2) Whole M1 macrophage medium 3) Whole M2 macrophage medium |
Sample Preparation:
Sampleprep ID: | SP000267 |
Sampleprep Summary: | Quality-control samples used in the study were prepared from pooled samples spiked with a selection of standards. All samples (200 μL) were thawed on ice at 4°C followed by deproteinization with methanol (1:4 ratio of plasma to methanol) and vortexed for 10 s, followed by incubation at −20°C for 2 h. The samples were then centrifuged at 15,871g for 30 min at 4°C. The supernatants were lyophilized (Savant, Holbrook, NY) and stored at −20°C prior to analysis. The samples were reconstituted in 50% H2O/acetonitrile and passed through a Microcon YM3 filter (Millipore Corporation). The supernatants were transferred to analytical vials, stored in the autosampler at 4°C, and analyzed within 48 h of reconstitution in buffer. |
Combined analysis:
Analysis ID | AN000375 | AN000376 | AN000377 | AN000378 |
---|---|---|---|---|
Analysis type | MS | MS | MS | MS |
Chromatography type | Reversed phase | Reversed phase | Reversed phase | Reversed phase |
Chromatography system | Waters Acquity | Waters Acquity | Waters Acquity | Waters Acquity |
Column | Waters high-strength silica (150 x 2.1mm,1.8um) | Waters high-strength silica (150 x 2.1mm,1.8um) | Waters high-strength silica (150 x 2.1mm,1.8um) | Waters high-strength silica (150 x 2.1mm,1.8um) |
MS Type | ESI | ESI | ESI | ESI |
MS instrument type | TOF | TOF | TOF | TOF |
MS instrument name | Agilent 6220 TOF | Agilent 6220 TOF | Agilent 6220 TOF | Agilent 6220 TOF |
Ion Mode | POSITIVE | NEGATIVE | POSITIVE | NEGATIVE |
Units | Peak area | Peak area | Peak area | Peak area |
Chromatography:
Chromatography ID: | CH000271 |
Chromatography Summary: | C18 |
Chromatography Comments: | Metabolite separation was achieved using an Acquity UPLC system (Waters, Milford, MA) with both hydrophilic interaction chromatography (HILIC) (ethylene-bridged hybrid 2.1150 mm, 1.7 mm; Waters) and reversed-phase liquid chromatography C18 (RPLC) (high-strength silica 2.1150 mm, 1.8 m; Waters). For each column, the run time was 20 min at a flow rate of 400 L/min. Reverse-phase chromatography was performed using 99% solvent A (5 mmol/L NH4 acetate, 0.1% formic acid, and 1% acetonitrile) to 100% solvent B (95% acetonitrile with 0.1% formic acid). The gradient was 0 min, 0% B; 1 min, 0% B; 3 min, 5% B; 13.0 min, 100% B; 16 min, 100% B; 16.5 min, 0% B; and 20 min, 0% B. The hydrophilic interaction chromatography gradient was as follows: 0 min, 100% B; 1 min, 100% B; 5 min, 90% B; 13.0 min, 0% B; 16 min, 0% B; 16.5 min, 100% B; and 20 min, 100% B. The injection volume of each sample was 5 L and column was maintained at 50C. |
Instrument Name: | Waters Acquity |
Column Name: | Waters high-strength silica (150 x 2.1mm,1.8um) |
Chromatography Type: | Reversed phase |
MS:
MS ID: | MS000321 |
Analysis ID: | AN000375 |
Instrument Name: | Agilent 6220 TOF |
Instrument Type: | TOF |
MS Type: | ESI |
MS Comments: | C18-PESI (+ve ESI) A 6220 ToF-MS (Agilent Technologies) was operated in both positive and negative electrospray ionization (ESI) modes using a scan range of 50?1,200 m/z. The mass accuracy and mass resolution were 5 parts per million (ppm) and 20,000 ppm, respectively. The instrument settings were as follows: nebulizer gas temperature 325°C, capillary voltage 3.5 kV, capillary temperature 300°C, fragmentor voltage 150 V, skimmer voltage 58 V, octapole voltage 250 V, cycle time 0.5 s, and run time 15.0 min. |
Ion Mode: | POSITIVE |
MS ID: | MS000322 |
Analysis ID: | AN000376 |
Instrument Name: | Agilent 6220 TOF |
Instrument Type: | TOF |
MS Type: | ESI |
MS Comments: | C18-NESI (-ve ESI) A 6220 ToF-MS (Agilent Technologies) was operated in both positive and negative electrospray ionization (ESI) modes using a scan range of 50?1,200 m/z. The mass accuracy and mass resolution were 5 parts per million (ppm) and 20,000 ppm, respectively. The instrument settings were as follows: nebulizer gas temperature 325°C, capillary voltage 3.5 kV, capillary temperature 300°C, fragmentor voltage 150 V, skimmer voltage 58 V, octapole voltage 250 V, cycle time 0.5 s, and run time 15.0 min. |
Ion Mode: | NEGATIVE |
MS ID: | MS000323 |
Analysis ID: | AN000377 |
Instrument Name: | Agilent 6220 TOF |
Instrument Type: | TOF |
MS Type: | ESI |
MS Comments: | HILIC-PESI (+ve ESI) A 6220 ToF-MS (Agilent Technologies) was operated in both positive and negative electrospray ionization (ESI) modes using a scan range of 50?1,200 m/z. The mass accuracy and mass resolution were 5 parts per million (ppm) and 20,000 ppm, respectively. The instrument settings were as follows: nebulizer gas temperature 325°C, capillary voltage 3.5 kV, capillary temperature 300°C, fragmentor voltage 150 V, skimmer voltage 58 V, octapole voltage 250 V, cycle time 0.5 s, and run time 15.0 min. |
Ion Mode: | POSITIVE |
MS ID: | MS000324 |
Analysis ID: | AN000378 |
Instrument Name: | Agilent 6220 TOF |
Instrument Type: | TOF |
MS Type: | ESI |
MS Comments: | HILIC-NESI (-ve ESI) A 6220 ToF-MS (Agilent Technologies) was operated in both positive and negative electrospray ionization (ESI) modes using a scan range of 50?1,200 m/z. The mass accuracy and mass resolution were 5 parts per million (ppm) and 20,000 ppm, respectively. The instrument settings were as follows: nebulizer gas temperature 325°C, capillary voltage 3.5 kV, capillary temperature 300°C, fragmentor voltage 150 V, skimmer voltage 58 V, octapole voltage 250 V, cycle time 0.5 s, and run time 15.0 min. |
Ion Mode: | NEGATIVE |