Summary of Study ST002236

This data is available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org, where it has been assigned Project ID PR001426. The data can be accessed directly via it's Project DOI: 10.21228/M8D42R This work is supported by NIH grant, U2C- DK119886.

See: https://www.metabolomicsworkbench.org/about/howtocite.php

This study contains a large results data set and is not available in the mwTab file. It is only available for download via FTP as data file(s) here.

Perform statistical analysis  |  Show all samples  |  Show named metabolites  |  Download named metabolite data  
Download mwTab file (text)   |  Download mwTab file(JSON)   |  Download data files (Contains raw data)
Study IDST002236
Study TitleThe impact of IgE in gut and serum metabolomes in a murine experimental model of allergic enteritis
Study TypeCase-control study
Study SummaryThe pathological mechanism of the gastrointestinal forms of food allergies is less understood in comparison to other clinical phenotypes, such as asthma, and anaphylaxis, partly due to difficulty in the access to intestinal tissues and because of a highly complex interplay between microbiota and intestinal mucosa. Importantly, a high level of IgE is a poor prognostic factor in gastrointestinal allergies. This study aimed to investigate how IgE influences the development of intestinal inflammation and the metabolome in allergic enteritis (AE), using IgE knock-in (IgEki) mice expressing high levels of IgE. Ovalbumin-sensitized and egg-white diet fed (OVA/EW) BALB/c WT mice developed moderate AE, whereas OVA/EW IgEki mice induced more aggravated intestinal inflammation with enhanced eosinophil accumulation.
Institute
Institute of Applied Molecular Medicine
Last NameZubeldia-Varela
First NameElisa
AddressAvda. Monteprincipe s/n 28668 Boadilla del Monte, Madrid, España
Emailelisa.zubeldiavarela@ceu.es
PhoneTlf: 91 372 47 00 ext. 14675
Submit Date2022-07-19
Num Groups4 groups: BALB/c wild type (WT) and IgE knock-in mice (C.Ighg1tm1.1Pyu) in the BALB/c background, both sensitised and non-sensitised to ovalbumin.
Total Subjects29
Raw Data AvailableYes
Raw Data File Type(s)d
Analysis Type DetailGC-MS/LC-MS
Release Date2022-08-10
Release Version1
Elisa Zubeldia-Varela Elisa Zubeldia-Varela
https://dx.doi.org/10.21228/M8D42R
ftp://www.metabolomicsworkbench.org/Studies/ application/zip

Select appropriate tab below to view additional metadata details:


Project:

Project ID:PR001426
Project DOI:doi: 10.21228/M8D42R
Project Title:Metabolomics approach to the study of food allergy
Project Summary:This project focuses on the metabolomics study of different types of food allergy with various cohorts.
Institute:Institute of Applied Molecular Medicine
Department:Basic Medical Sciences. Faculty of Medicine
Last Name:Pérez-Gordo
First Name:Marina
Address:Avda. Monteprincipe s/n 28668 Boadilla del Monte, Madrid, España
Email:marina.perezgordo@ceu.es
Phone:Tlf: 91 372 47 00 ext. 14675

Subject:

Subject ID:SU002322
Subject Type:Mammal
Subject Species:Mus musculus
Taxonomy ID:10090

Factors:

Subject type: Mammal; Subject species: Mus musculus (Factor headings shown in green)

mb_sample_id local_sample_id Genotype Ovalbumin sensitisation
SA213049WT (Only EW) 2FBALB/c wild type Non-sensitised to ovalbumin
SA213050WT (Only EW) 3FBALB/c wild type Non-sensitised to ovalbumin
SA213051WT (Only EW) 1SBALB/c wild type Non-sensitised to ovalbumin
SA213052WT (Only EW) 1FBALB/c wild type Non-sensitised to ovalbumin
SA213053WT (Only EW) 7SBALB/c wild type Non-sensitised to ovalbumin
SA213054WT (Only EW) 3SBALB/c wild type Non-sensitised to ovalbumin
SA213055WT (Only EW) 2SBALB/c wild type Non-sensitised to ovalbumin
SA213056WT (Only EW) 6FBALB/c wild type Non-sensitised to ovalbumin
SA213057WT (Only EW) 4FBALB/c wild type Non-sensitised to ovalbumin
SA213058WT (Only EW) 7FBALB/c wild type Non-sensitised to ovalbumin
SA213059WT (Only EW) 5SBALB/c wild type Non-sensitised to ovalbumin
SA213060WT (Only EW) 6SBALB/c wild type Non-sensitised to ovalbumin
SA213061WT (Only EW) 5FBALB/c wild type Non-sensitised to ovalbumin
SA213062WT (Only EW) 4SBALB/c wild type Non-sensitised to ovalbumin
SA213063WT (OVA_EW) 3FBALB/c wild type Sensitised to ovalbumin
SA213064WT (OVA_EW) 3SBALB/c wild type Sensitised to ovalbumin
SA213065WT (OVA_EW) 2SBALB/c wild type Sensitised to ovalbumin
SA213066WT (OVA_EW) 2FBALB/c wild type Sensitised to ovalbumin
SA213067WT (OVA_EW) 4FBALB/c wild type Sensitised to ovalbumin
SA213068WT (OVA_EW) 1FBALB/c wild type Sensitised to ovalbumin
SA213069WT (OVA_EW) 1SBALB/c wild type Sensitised to ovalbumin
SA213070WT (OVA_EW) 4SBALB/c wild type Sensitised to ovalbumin
SA213071WT (OVA_EW) 5FBALB/c wild type Sensitised to ovalbumin
SA213072WT (OVA_EW) 7SBALB/c wild type Sensitised to ovalbumin
SA213073WT (OVA_EW) 6SBALB/c wild type Sensitised to ovalbumin
SA213074WT (OVA_EW) 7FBALB/c wild type Sensitised to ovalbumin
SA213075WT (OVA_EW) 6FBALB/c wild type Sensitised to ovalbumin
SA213076WT (OVA_EW) 5SBALB/c wild type Sensitised to ovalbumin
SA213077IgEki (Only EW) 3FIgE knock-in mice Non-sensitised to ovalbumin
SA213078IgEki (Only EW) 4FIgE knock-in mice Non-sensitised to ovalbumin
SA213079IgEki (Only EW) 3SIgE knock-in mice Non-sensitised to ovalbumin
SA213080IgEki (Only EW) 1SIgE knock-in mice Non-sensitised to ovalbumin
SA213081IgEki (Only EW) 4SIgE knock-in mice Non-sensitised to ovalbumin
SA213082IgEki (Only EW) 2FIgE knock-in mice Non-sensitised to ovalbumin
SA213083IgEki (Only EW) 2SIgE knock-in mice Non-sensitised to ovalbumin
SA213084IgEki (Only EW) 6SIgE knock-in mice Non-sensitised to ovalbumin
SA213085IgEki (Only EW) 7SIgE knock-in mice Non-sensitised to ovalbumin
SA213086IgEki (Only EW) 1FIgE knock-in mice Non-sensitised to ovalbumin
SA213087IgEki (Only EW) 7FIgE knock-in mice Non-sensitised to ovalbumin
SA213088IgEki (Only EW) 6FIgE knock-in mice Non-sensitised to ovalbumin
SA213089IgEki (Only EW) 5SIgE knock-in mice Non-sensitised to ovalbumin
SA213090IgEki (Only EW) 5FIgE knock-in mice Non-sensitised to ovalbumin
SA213091IgEki (OVA_EW) 8SIgE knock-in mice Sensitised to ovalbumin
SA213092IgEki (OVA_EW) 3FIgE knock-in mice Sensitised to ovalbumin
SA213093IgEki (OVA_EW) 3SIgE knock-in mice Sensitised to ovalbumin
SA213094IgEki (OVA_EW) 2SIgE knock-in mice Sensitised to ovalbumin
SA213095IgEki (OVA_EW) 2FIgE knock-in mice Sensitised to ovalbumin
SA213096IgEki (OVA_EW) 1FIgE knock-in mice Sensitised to ovalbumin
SA213097IgEki (OVA_EW) 1SIgE knock-in mice Sensitised to ovalbumin
SA213098IgEki (OVA_EW) 4FIgE knock-in mice Sensitised to ovalbumin
SA213099IgEki (OVA_EW) 4SIgE knock-in mice Sensitised to ovalbumin
SA213100IgEki (OVA_EW) 7FIgE knock-in mice Sensitised to ovalbumin
SA213101IgEki (OVA_EW) 7SIgE knock-in mice Sensitised to ovalbumin
SA213102IgEki (OVA_EW) 6SIgE knock-in mice Sensitised to ovalbumin
SA213103IgEki (OVA_EW) 6FIgE knock-in mice Sensitised to ovalbumin
SA213104IgEki (OVA_EW) 5FIgE knock-in mice Sensitised to ovalbumin
SA213105IgEki (OVA_EW) 5SIgE knock-in mice Sensitised to ovalbumin
SA213106IgEki (OVA_EW) 8FIgE knock-in mice Sensitised to ovalbumin
Showing results 1 to 58 of 58

Collection:

Collection ID:CO002315
Collection Summary:Faecal and serum samples were obtained and stored at -80°C until metabolite extraction.
Sample Type:Feces; Blood (serum)
Storage Conditions:-80?

Treatment:

Treatment ID:TR002334
Treatment Summary:Mice  (female, 6 to 8 weeks old) were sensitized by an intraperitoneal injection with 10 µg of ovalbumin (OVA, Sigma-Aldrich) and 1 mg of Alum (ThermoFisher Scientific) in 500 µl of PBS or treated only with PBS twice as non-sensitized controls, at a two-week interval.

Sample Preparation:

Sampleprep ID:SP002328
Sampleprep Summary:FAECES. Frozen faeces samples were lyophilized overnight at -80°C. Faecal pellets were doubly extracted (i) first with MeOH:MTBE (4:1, v/v) and (ii) with MeOH:H2O (4:1, v/v). Equal volumes (300 µL) of the supernatants from (i) and (ii) were then mixed and aliquoted for subsequent analysis. SERUM. Serum samples (100 µL) were deproteinized by an addition of 300 µL of cold acetonitrile (1:3 v/v) and homogenized for 15 min in a vortex. After a 10 min ice bath, samples were centrifuged (16000 x g, 4°C, 20 min) and stored at -20°C until the start of sample treatment. The resulting supernatants were filtered through 0.22 µm for LC-MS, 80 µL were transferred into an analytical vial for their analysis. For CE-MS, 80 µL of the supernatants were evaporated to dryness using a Speedvac Concentrator and reconstituted in 80 µL of MilliQ® water containing an internal standard (0.2 mM L-methionine sulfone) and 0.1 M FA. Finally, for GC-MS, 120 µL of the corresponding aliquots were evaporated to dryness using a Speedvac Concentrator, followed by the addition of 10 µL of O-methoxyamine hydrochloride (15 mg/mL) in pyridine for methoximation. After gently vortexing, the vials were incubated in darkness at room temperature for 16 h. Then, 10 µL of BSTFA with 1 % TMCS (v/v) were added and samples were vortexed for 5 min, silylation was carried out for 1 h at 70 °C and finally 120 µL of C18:0 methyl ester (10 mg/L in heptane) were added as an internal standard and samples were mixed again by gentle vortexing. Eight blank samples were prepared for GC-MS by the same procedure of extraction and derivatization.
Sampleprep Protocol Filename:Protocolsamples.docx
Processing Method:Lyophilization, homogenization, protein precipitation and metabolite extraction
Processing Storage Conditions:On ice

Combined analysis:

Analysis ID AN003646 AN003647 AN003648 AN003649
Analysis type MS MS MS MS
Chromatography type Reversed phase Reversed phase CE GC
Chromatography system Agilent 1290 Agilent 1290 Agilent 7100 CE Agilent 7890A
Column Zorbax Extend C18 (50 x 2.1 mm,1.8um) Zorbax Extend C18 (50 x 2.1 mm,1.8um) Fused-silica capillary (total length,100 cm;,50um) Agilent DB5-MS (30m x 0.25mm, 0.25um)
MS Type ESI ESI ESI EI
MS instrument type QTOF QTOF TOF Single quadrupole
MS instrument name Agilent 6545 QTOF Agilent 6545 QTOF Agilent 6224 TOF Agilent 5975C
Ion Mode POSITIVE NEGATIVE POSITIVE POSITIVE
Units Peak Area peak area Peak Area Peak area

Chromatography:

Chromatography ID:CH002700
Chromatography Summary:For LC-MS, 0.5 µL of sample were injected into a Zorbax Extend C18 (50 x 2.1 mm, 1.8 µm) maintained at 60 °C. The flow rate was set at 0.6 mL/min. . The flow rate was set at 0.6 mL/min. The elution gradient involved a mobile phase consisting of: (A) 0.1% formic acid (FA) in water and (B) 0.1% FA in acetonitrile (ACN). The gradient was 5% B (0–1 min), 5 to 80% B (1–7 min), 80 to 100% B (7–11.5 min), and 100 to 5% B (11.5–12 min). The system was finally held at 5% B for 3 min to re-equilibrate the system (15 min of total analysis time). The ESI data were acquired in both modes, ESI (+) and ESI (-), in separate runs. The capillary voltage was set at 3,000V for ESI (+) and 4,000V for ESI (-). The drying gas flow rate was 12 L/min at 250 °C and gas nebulizer at 52 psi; nozzle voltage was 1000V; fragmentor voltage was 175 V; skimmer and octopole radio frequency voltage (OCT RF Vpp) were set to 65 and 750 V, respectively. Data were collected in the centroid mode at a scan rate of 1.5 spectra per second.
Methods Filename:Protocolmethods.docx
Instrument Name:Agilent 1290
Column Name:Zorbax Extend C18 (50 x 2.1 mm,1.8um)
Column Temperature:60
Flow Gradient:5% B (0-1 min), 5 to 80% B (1-7 min), 80 to 100% B (7-11.5 min), and 100 to 5% B (11.5-12 min). The system was finally held at 5% B for 3 min to re-equilibrate the system (15 min of total analysis time).
Flow Rate:0.6 mL/min
Sample Injection:0.5 µL
Solvent A:100% water; 0.1% formic acid
Solvent B:100% acetonitrile; 0.1% formic acid
Chromatography Type:Reversed phase
  
Chromatography ID:CH002701
Chromatography Summary:For LC-MS, 0.5 µL of sample were injected into a Zorbax Extend C18 (50 x 2.1 mm, 1.8 µm) maintained at 60 °C. The flow rate was set at 0.6 mL/min. . The flow rate was set at 0.6 mL/min. The elution gradient involved a mobile phase consisting of: (A) 0.1% formic acid (FA) in water and (B) 0.1% FA in acetonitrile (ACN). The gradient was 5% B (0–1 min), 5 to 80% B (1–7 min), 80 to 100% B (7–11.5 min), and 100 to 5% B (11.5–12 min). The system was finally held at 5% B for 3 min to re-equilibrate the system (15 min of total analysis time). The ESI data were acquired in both modes, ESI (+) and ESI (-), in separate runs. The capillary voltage was set at 3,000V for ESI (+) and 4,000V for ESI (-). The drying gas flow rate was 12 L/min at 250 °C and gas nebulizer at 52 psi; nozzle voltage was 1000V; fragmentor voltage was 175 V; skimmer and octopole radio frequency voltage (OCT RF Vpp) were set to 65 and 750 V, respectively. Data were collected in the centroid mode at a scan rate of 1.5 spectra per second.
Methods Filename:Protocolmethods.docx
Instrument Name:Agilent 1290
Column Name:Zorbax Extend C18 (50 x 2.1 mm,1.8um)
Column Temperature:60
Flow Gradient:5% B (0-1 min), 5 to 80% B (1-7 min), 80 to 100% B (7-11.5 min), and 100 to 5% B (11.5-12 min). The system was finally held at 5% B for 3 min to re-equilibrate the system (15 min of total analysis time).
Flow Rate:0.6 mL/min
Solvent A:100% water; 0.1% formic acid
Solvent B:100% acetonitrile; 0.1% formic acid
Chromatography Type:Reversed phase
  
Chromatography ID:CH002702
Chromatography Summary:For CE-MS, the separation occurred in a fused-silica capillary (Agilent: total length, 100 cm; i.d., 50 µm). All separations were performed in normal polarity with a background electrolyte containing 1.0 M formic acid in 10% MeOH (v/v) at 20°C. New capillaries were preconditioned with a flush of 1.0 M NaOH for 30 min, followed by MilliQ water for 30 min and the background electrolyte for 30 min. Before each analysis, the capillary was conditioned with a flush of background electrolyte for 5 min. The sheath liquid (10 µL/min) was MeOH:H2O (1:1) containing 1.0 mM FA with two reference masses 121.0509 (purine), and 922.0098 (HP), which allowed for correction and higher mass accuracy in the MS. The sheath liquid was infused by an ISO Pump (1200 Agilent). The samples were hydrodynamically injected at 50 mBar for 50 s. The stacking was performed by applying the background electrolyte at 100 mBar for 20 s. The separation voltage was 30 kV, the internal pressure was 25 mBar and the analyses were performed in 40 min.
Methods Filename:Protocolmethods.docx
Instrument Name:Agilent 7100 CE
Column Name:Fused-silica capillary (total length,100 cm;,50um)
Chromatography Type:CE
  
Chromatography ID:CH002703
Chromatography Summary:For GC-MS, two microliters (2 µL) of the derivatized sample were injected through a DB5-MS GC-Column (30 m length, 0.25 mm i.d., 0.25 µm film 95% dimethyl/5% diphenylpolysiloxane) with an integrated precolumn (10 m J&W, Agilent). Carrier gas (Helium) flow rate was set at 1 mL/min and injector temperature at 250 °C. Split ratio was fixed from 1:5 to 1:10 with 3 to 10 mL/min Helium split flow into a Restek 20782 (Bellefonte, PA, USA) deactivated glass-wool split liner. The temperature gradient was programmed as follows: the initial oven temperature was set at 60 °C (held for 1 min), increased to 325 °C at 10 °C/min rate (within 26.5 min) and was held at 325 °C for 10 min. The total run time was 37.5 min. A cool-down period of 10 min was applied before the next injection.
Methods Filename:Protocolmethods.docx
Instrument Name:Agilent 7890A
Column Name:Agilent DB5-MS (30m x 0.25mm, 0.25um)
Chromatography Type:GC

MS:

MS ID:MS003397
Analysis ID:AN003646
Instrument Name:Agilent 6545 QTOF
Instrument Type:QTOF
MS Type:ESI
MS Comments:LC-MS analysis was performed on an Agilent HPLC system (1290 infinity II series, Agilent Technologies, Waldbronn, Germany), equipped with a degasser, two binary pumps, and a thermostated autosampler coupled with quadrupole-time of flight analyzer (Q-TOF), LC-MS (6545) system (Agilent Technologies, Waldbronn, Germany)
Ion Mode:POSITIVE
  
MS ID:MS003398
Analysis ID:AN003647
Instrument Name:Agilent 6545 QTOF
Instrument Type:QTOF
MS Type:ESI
MS Comments:LC-MS analysis was performed on an Agilent HPLC system (1290 infinity II series, Agilent Technologies, Waldbronn, Germany), equipped with a degasser, two binary pumps, and a thermostated autosampler coupled with quadrupole-time of flight analyzer (Q-TOF), LC-MS (6545) system (Agilent Technologies, Waldbronn, Germany)
Ion Mode:NEGATIVE
  
MS ID:MS003399
Analysis ID:AN003648
Instrument Name:Agilent 6224 TOF
Instrument Type:TOF
MS Type:ESI
MS Comments:CE-MS analysis was performed by a CE system (Agilent Technologies 7100) coupled to a time of flight analyzer (TOF; Agilent Technologies 6224)
Ion Mode:POSITIVE
  
MS ID:MS003400
Analysis ID:AN003649
Instrument Name:Agilent 5975C
Instrument Type:Single quadrupole
MS Type:EI
MS Comments:GC-MS analysis was performed by a GC system (Agilent Technologies 7890A) equipped with an autosampler (Agilent 7693) coupled to a mass spectrometer with triple-Axis detector (5975C, Agilent).
Ion Mode:POSITIVE
  logo