Summary of Study ST003332

This data is available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org, where it has been assigned Project ID PR002070. The data can be accessed directly via it's Project DOI: 10.21228/M81Z4C This work is supported by NIH grant, U2C- DK119886.

See: https://www.metabolomicsworkbench.org/about/howtocite.php

This study contains a large results data set and is not available in the mwTab file. It is only available for download via FTP as data file(s) here.

Perform statistical analysis  |  Show all samples  |  Show named metabolites  |  Download named metabolite data  
Download mwTab file (text)   |  Download mwTab file(JSON)   |  Download data files (Contains raw data)
Study IDST003332
Study TitleIncreased Cholesterol Synthesis Drives Neurotoxicity in Patient Stem Cell-Derived Model of Multiple Sclerosis - media metabolomics
Study SummaryFibroblasts from skin biopsies from patients with progressive multiple sclerosis (PMS) and age-matched controls (AMC) were derived and reprogrammed to yield induced neural stem cells (iNSCs). The resulting iNSCs were cultured in the presence of 13C6 glucose for 24h to assess changes in the intracellular metabolome, in particular changes in the flux of glucose-derived carbon into the TCA cycle along with steady state levels of compounds in other areas of the metabolome. The data in this study are from the assessment of the conditioned culture media at the end of the 24h incubation period.
Institute
University of Colorado Denver
Last NameHaines
First NameJulie
Address12801 E 17th Ave, Room 1303, Aurora, Colorado, 80045, USA
Emailjulie.haines@cuanschutz.edu
Phone3037243339
Submit Date2024-07-19
Raw Data AvailableYes
Raw Data File Type(s)raw(Thermo)
Analysis Type DetailLC-MS
Release Date2024-08-08
Release Version1
Julie Haines Julie Haines
https://dx.doi.org/10.21228/M81Z4C
ftp://www.metabolomicsworkbench.org/Studies/ application/zip

Select appropriate tab below to view additional metadata details:


Project:

Project ID:PR002070
Project DOI:doi: 10.21228/M81Z4C
Project Title:Increased Cholesterol Synthesis Drives Neurotoxicity in Patient Stem Cell-Derived Model of Multiple Sclerosis
Project Summary:Senescent neural progenitor cells have been identified in brain lesions of people with progressive multiple sclerosis (PMS). However, their role in disease pathobiology and contribution to the lesion environment remains unclear. By establishing directly induced neural stem/progenitor cell (iNSC) lines from PMS patient fibroblasts, we studied their senescent phenotype in vitro. Senescence was strongly associated with inflammatory signaling, hypermetabolism, and the senescence associated secretory phenotype (SASP). PMS-derived iNSCs displayed increased glucose-dependent fatty acid and cholesterol synthesis, which resulted in the accumulation of cholesteryl ester-enriched lipid droplets. An HMG-CoA reductase-mediated lipogenic state was found to induce secretion of the SASP in PMS iNSC conditioned media via transcriptional regulation by cholesterol-dependent transcription factors. SASP from PMS iNSCs induced neurotoxicity. Chemical targeting of HMG-CoA reductase using the cholesterol-lowering drug simvastatin (SV) reprogrammed the SASP and rescued neurotoxicity. Our findings suggest a disease-associated, cholesterol-related, hypermetabolic phenotype of PMS iNSCs that leads to neurotoxic signaling and is rescuable pharmacologically.
Institute:University of Colorado Denver
Laboratory:Lab of Angelo D'Alessandro in collaboration with lab of Stefano Pluchino (Univ of Cambridge)
Last Name:Haines
First Name:Julie
Address:12801 E 17th Ave, Room 1303, Aurora, Colorado, 80045, USA
Email:julie.haines@cuanschutz.edu
Phone:3037243339

Subject:

Subject ID:SU003453
Subject Type:Cultured cells
Subject Species:Homo sapiens
Taxonomy ID:9606
Gender:Female

Factors:

Subject type: Cultured cells; Subject species: Homo sapiens (Factor headings shown in green)

mb_sample_id local_sample_id Disease state Sample source
SA362460AMC D S7AMC cell culture supernatant
SA362461AMC A S8AMC cell culture supernatant
SA362462AMC D S9AMC cell culture supernatant
SA362463AMC D S8AMC cell culture supernatant
SA362464AMC A S7AMC cell culture supernatant
SA362465AMC B S9AMC cell culture supernatant
SA362466AMC B S8AMC cell culture supernatant
SA362467AMC B S7AMC cell culture supernatant
SA362468AMC A S9AMC cell culture supernatant
SA362481NC 7no cell ctrl cell culture supernatant
SA362482NC 8no cell ctrl cell culture supernatant
SA362483NC 9no cell ctrl cell culture supernatant
SA362469PMS D S9PMS cell culture supernatant
SA362470PMS D S8PMS cell culture supernatant
SA362471PMS D S7PMS cell culture supernatant
SA362472PMS C S9PMS cell culture supernatant
SA362473PMS C S8PMS cell culture supernatant
SA362474PMS C S7PMS cell culture supernatant
SA362475PMS B S9PMS cell culture supernatant
SA362476PMS B S8PMS cell culture supernatant
SA362477PMS A S9PMS cell culture supernatant
SA362478PMS A S8PMS cell culture supernatant
SA362479PMS A S7PMS cell culture supernatant
SA362480PMS B S7PMS cell culture supernatant
Showing results 1 to 24 of 24

Collection:

Collection ID:CO003446
Collection Summary:3-5 mm skin biopsies were collected in Biopsy Collection Medium (RPMI 1460 [Thermo Fisher] with 1X Antibiotic-Antimycotic [Thermo Fisher]), cut into smaller pieces (<1 mm) and plated onto a TC-treated 35 mm dish in Biopsy Plating Medium, composed by Knockout DMEM (Thermo Fisher), 2 mM GlutaMax (Thermo Fisher), 0.1 mM non-essential amino acids (Thermo Fisher), 0.1 mM β-Mercaptoethanol (Thermo Fisher), 10% Fetal Bovine Serum (FBS) (Thermo Fisher), 1X Penicillin-Streptomycin (P/S) (Thermo Fisher) and 1% Nucleosides (Millipore). Once the first fibroblasts migrated out of the biopsies, the cultures were maintained in growth medium (DMEM Glutamax I [Thermo Fisher] supplemented with 10% fetal bovine serum, 1% non-essential amino acids and 1 mM sodium pyruvate (Thermo Fisher) at 37°C with 5 % CO2 and fed every 3-4 days. After reaching 90% confluency the fibroblasts were detached with trypsin-EDTA 0.05% for 5 min followed by neutralization in DMEM and spun down at 300xg for 5 min. They were split 1:4 into growth media. Fibroblasts at passage 3-5 were reprogrammed to iPSCs using the integration free technology based on non-modified RNA plus microRNA (kit from REPROCELL, formerly Stemgent), following manufacturer’s instructions. About 25x10^3 fibroblasts/well were plated onto Matrigel-coated 12-well plates in culture medium for 24 hours and then in NuFF-conditioned Pluriton reprogramming medium with B18R. Cells were transfected for 11 consecutive days using Stemfect as following: day 0 microRNA only, days 1-3 RNA only, day 4 microRNA plus RNA, days 5-11 RNA only. From day 11, TRA-1-60+ colonies (live stained) were manually picked and re-plated on mouse embryonic fibroblasts in HUESM medium (Knockout-DMEM, 20% knock-out serum, glutamax 2mM, NEAA 0.1mM, 1X P/S and β-mercaptoethanol 0.1mM [Thermo Fisher]). Pluripotent colonies were passaged and adapted to feeder-free conditions with hESC matrigel (Corning) and mTeSR1 (STEMCELL Technologies) medium. The WIBJ iPSC line, obtained from Cambridge BioResource as a gift from Alessandra Granada, was reprogrammed from fibroblasts using the CytoTune 1 non-integrating kit (Thermo Fisher). iPSC media was changed every day. When confluent, cells were lifted using accutase (Thermo Fisher), spun at 300xg for 5 min, and split 1:10-1:20 onto hESC-matrigel coated plates with Y-27632 (10 uM) (Thermo Fisher) in mTeSR1 media. To generate directly induced neural stem cells (iNSCs) from fibroblasts we used a nonintegrating Sendai virus-based direct conversion strategy, as previously described (https://doi.org/10.3791/52831). Briefly, fibroblasts were seeded at 75,000/well in fibroblast media in a non-coated 12-well. On the next day the fibroblasts were transduced using the CytoTune-iPS 2.0 Sendai Reprogramming Kit (Thermo Fisher) with hKOS (MOI: 3), hc-Myc (MOI: 3), hKlf4 (MOI: 3). The day following transfection, the medium was switched to neural induction medium (NIM) [DMEM:F12 and Neurobasal (1:1), supplemented with N2 supplement (1x, ThermoFisher), 1% glutamax, B27 supplement (1x, ThermoFisher), CHIR99021 (3 µM, Cell Guidance Systems), SB-431542 (2 µM, Cayman Chemicals) and hLIF (10 ng/ml, Cell Signaling Technology)], and cells were moved to 39°C with 5% CO2 to achieve viral clearance over 14 days. A few samples were collected here to generate positive controls for quality control assays. Medium changes were performed every other day. Following 25 days of transfection, iNSC colonies were manually selected, seeded onto Growth Factor Reduced (GFR) Matrigel Matrix (1:20 in DMEM/F12) coated plates for expansion, and subjected to quality control assays. iNSCs were maintained in NIM media until 70% confluent, then lifted using accutase (ThermoFisher), spun at 300xg for 3 mins, and plated onto GFR-Matrigel coated plates with Y-27632 (10 µM, Miltenyi Biotec) between 1:3-1:5 in NIM media. Media was changed every second day as needed. Experiments were performed on cells from passages 20-40.
Sample Type:Culture Media

Treatment:

Treatment ID:TR003462
Treatment Summary:iNSCs were seeded in NIM with Y-27632 (10 µM) at a density of 100,000 cells/cm2 GFR-matrigel coated wells, in technical triplicates per line. Medium was changed the next day. Glucose tracer experiments were run on day 2 after seeding by removing the culture medium and adding glucose-free NIM [DMEM:F12 w/o glucose and Neurobasal (1:1), supplemented with N2 supplement (1x, ThermoFisher), Glutamax (Thermo Fisher, 3.2 mM), pyruvate (Agilent, 0.35 mM), B27 supplement (1x, ThermoFisher), CHIR99021 (3 µM, Cell Guidance Systems), SB-431542 (2 µM, Cayman Chemicals) and hLIF (10 ng/ml, Cell Signaling Technology)] supplemented with D-Glucose-13C6 (ThermoFisher, 20.4 mM). Samples were collected after 24 hours for optimal resolution into TCA cycle and anabolic metabolic pathways. Sample collection was performed on ice. Conditioned culture medium was collected, spun at 300 x g for 5 minutes to remove cellular debris and 100 µL was stored at -80 oC until sample processing.

Sample Preparation:

Sampleprep ID:SP003460
Sampleprep Summary:Metabolites from thawed media aliquots (20 uL) were extracted with 480 uL of ice cold 5:3:2 methanol:acetonitrile:water (v/v/v) with vigorous vortexing at 4 degrees C followed by centrifugation for 10 min at 18,000 g, 4°C and stored at −80°C until analysis.
Processing Storage Conditions:4℃
Extract Storage:-80℃

Combined analysis:

Analysis ID AN005458 AN005459
Analysis type MS MS
Chromatography type Reversed phase Reversed phase
Chromatography system Thermo Vanquish Thermo Vanquish
Column Phenomenex Kinetex C18 (150 x 2.1mm,1.7um) Phenomenex Kinetex C18 (150 x 2.1mm,1.7um)
MS Type ESI ESI
MS instrument type Orbitrap Orbitrap
MS instrument name Thermo Q Exactive Orbitrap Thermo Q Exactive Orbitrap
Ion Mode NEGATIVE POSITIVE
Units peak area peak area

Chromatography:

Chromatography ID:CH004145
Chromatography Summary:Negative C18
Instrument Name:Thermo Vanquish
Column Name:Phenomenex Kinetex C18 (150 x 2.1mm,1.7um)
Column Temperature:45
Flow Gradient:0-0.5 min 0% B, 0.5-1.1 min 0-100% B, 1.1-2.75 min hold at 100% B, 2.75-3 min 100-0% B, 3-5 min hold at 0% B
Flow Rate:450 uL/min
Sample Injection:20 uL
Solvent A:95% water/5% acetonitrile; 1 mM ammonium acetate
Solvent B:95% acetonitrile/5% water; 1 mM ammonium acetate
Chromatography Type:Reversed phase
  
Chromatography ID:CH004146
Chromatography Summary:Positive C18
Instrument Name:Thermo Vanquish
Column Name:Phenomenex Kinetex C18 (150 x 2.1mm,1.7um)
Column Temperature:45
Flow Gradient:0-0.5 min 5% B, 0.5-1.1 min 5-95% B, 1.1-2.75 min hold at 95% B, 2.75-3 min 95-5% B, 3-5 min hold at 5% B
Flow Rate:450 uL/min
Sample Injection:20 uL
Solvent A:100% water; 0.1% formic acid
Solvent B:100% acetonitrile; 0.1% formic acid
Chromatography Type:Reversed phase

MS:

MS ID:MS005184
Analysis ID:AN005458
Instrument Name:Thermo Q Exactive Orbitrap
Instrument Type:Orbitrap
MS Type:ESI
MS Comments:Resolution 70,000, scan range 65-900 m/z, maximum injection time 200 ms, microscans 2, automatic gain control (AGC) 3 x 10^6 ions, source voltage 4.0 kV, capillary temperature 320 C, and sheath gas 45, auxiliary gas 15, and sweep gas 0 (all nitrogen). Data converted to mzXML using RawConverter. Metabolites were annotated and integrated using Maven in conjunction with the KEGG database.
Ion Mode:NEGATIVE
  
MS ID:MS005185
Analysis ID:AN005459
Instrument Name:Thermo Q Exactive Orbitrap
Instrument Type:Orbitrap
MS Type:ESI
MS Comments:Resolution 70,000, scan range 65-900 m/z, maximum injection time 200 ms, microscans 2, automatic gain control (AGC) 3 x 10^6 ions, source voltage 4.0 kV, capillary temperature 320 C, and sheath gas 45, auxiliary gas 15, and sweep gas 0 (all nitrogen). Data converted to mzXML using RawConverter. Metabolites were annotated and integrated using Maven in conjunction with the KEGG database.
Ion Mode:POSITIVE
  logo