Return to study ST001724 main page
MB Sample ID: SA162365
| Local Sample ID: | 17 |
| Subject ID: | SU001801 |
| Subject Type: | Mammal |
| Subject Species: | Sus scrofa |
| Taxonomy ID: | 9823 |
| Age Or Age Range: | 0-125 days |
| Weight Or Weight Range: | 1-80 kg |
| Gender: | Male |
| Animal Animal Supplier: | Swine Innovation Centre Sterksel, the Netherlands |
| Animal Housing: | Metabolism cages |
| Animal Light Cycle: | 12h light / 12h darknes |
| Animal Feed: | Experimental diets (see publication) |
| Animal Water: | Ad libitum |
| Animal Inclusion Criteria: | Birth weight |
Select appropriate tab below to view additional metadata details:
Combined analysis:
| Analysis ID | AN002808 | AN002809 |
|---|---|---|
| Analysis type | MS | MS |
| Chromatography type | Reversed phase | Reversed phase |
| Chromatography system | Thermo Dionex Ultimate 3000 RS | Thermo Dionex Ultimate 3000 RS |
| Column | Waters Acquity BEH HSS T3 (100 x 2.1mm,1.8um) | Waters Acquity BEH HSS T3 (100 x 2.1mm,1.8um) |
| MS Type | ESI | ESI |
| MS instrument type | QTOF | QTOF |
| MS instrument name | Bruker Impact HD | Bruker Impact HD |
| Ion Mode | NEGATIVE | POSITIVE |
| Units | peak area | peak area |
MS:
| MS ID: | MS002603 |
| Analysis ID: | AN002808 |
| Instrument Name: | Bruker Impact HD |
| Instrument Type: | QTOF |
| MS Type: | ESI |
| MS Comments: | The eluent was introduced into the mass spectrometer by electrospray ionization, with capillary set in the positive and negative mode to 4500 and 3600 V, respectively. End-plate offset voltage was set to 500 V. Nitrogen was used as both nebulizer and drying gas with a gas pressure of 1.8 bar. Drying gas temperature and flow were 200 °C and 8.0 L/min, respectively. Spectra were acquired over the scan range of 50−1000 m/z. A solution of lithium formate clusters (5 mM) (water/isopropanol/formic acid in a 50:50:0.2 v/v/v ratio) was injected prior to each chromatographic run as an external calibrant. |
| Ion Mode: | NEGATIVE |
| MS ID: | MS002604 |
| Analysis ID: | AN002809 |
| Instrument Name: | Bruker Impact HD |
| Instrument Type: | QTOF |
| MS Type: | ESI |
| MS Comments: | The eluent was introduced into the mass spectrometer by electrospray ionization, with capillary set in the positive and negative mode to 4500 and 3600 V, respectively. End-plate offset voltage was set to 500 V. Nitrogen was used as both nebulizer and drying gas with a gas pressure of 1.8 bar. Drying gas temperature and flow were 200 °C and 8.0 L/min, respectively. Spectra were acquired over the scan range of 50−1000 m/z. A solution of lithium formate clusters (5 mM) (water/isopropanol/formic acid in a 50:50:0.2 v/v/v ratio) was injected prior to each chromatographic run as an external calibrant. |
| Ion Mode: | POSITIVE |
